SN74AS825ADWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Additional Feature | WITH TRIPLE OUTPUT ENABLE; WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS825 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 3.5 ns |
| Family | AS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 73mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 48mA |
| Max Propagation Delay @ V, Max CL | 13ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 90mA |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 62500000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74AS825ADWRG4 Overview
The item is packaged in 24-SOIC (0.295, 7.50mm Width)cases. The package Tape & Reel (TR)contains it. The output it is configured with uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. In this case, the operating temperature is 0°C~70°C TA. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74ASseries contain this type of chip. A total of 1elements are contained within it. This process consumes 73mA quiescents. The number of terminations is 24. The 74AS825family includes it. The D flip flop is powered by a voltage of 5V . A device of this type belongs to the family of AS. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 24. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. Flip flops designed with 8bits are used in this part. There is a 5.5Vmaximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be above 4.5V. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. The D latch runs on a voltage of 5V volts. The D flip flop has no ports embedded. It operates with 8 output lines. Furthermore, it has WITH TRIPLE OUTPUT ENABLE; WITH CLEAR AND CLOCK ENABLEas a characteristic.
SN74AS825ADWRG4 Features
Tape & Reel (TR) package
74AS series
24 pins
8 Bits
5V power supplies
SN74AS825ADWRG4 Applications
There are a lot of Texas Instruments SN74AS825ADWRG4 Flip Flops applications.
- High Performance Logic for test systems
- Dynamic threshold performance
- Cold spare funcion
- Supports Live Insertion
- Clock pulse
- Registers
- Single Down Count-Control Line
- Individual Asynchronous Resets
- Control circuits
- QML qualified product
