SN74AUC16373DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AUC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AUC16373 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 0.8V |
| Load Capacitance | 30pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 1.9 ns |
| Turn On Delay Time | 8 ns |
| Family | AUC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.009 A |
| Prop. Delay@Nom-Sup | 4.9 ns |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 16 |
| Independent Circuits | 2 |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUC16373DGGR Overview
The package in which it is embedded is named 48-TFSOP (0.240, 6.10mm Width). Packaged in the way of Cut Tape (CT). It uses the output configuration Tri-State. This electrical device has the logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. The supply voltage of the device is 0.8V~2.7V. There is -40°C~85°C operating temperature. An FPGA of this type belongs to the 74AUC series. The electronic part in this image has 8 bits. This device is designed with 48 terminations. The family 74AUC16373 includes it. With the supply voltage set at 1.2V, it is able to operate. 48 pins are provided. It is part of the family of electronic devices called AUC. With the design of the board, there are only 48 pins. Surface Mount is used to mount this electronic part. This device has a total of 2 ports. FF/Latches is the subcategory of this part. A voltage greater than 0.8V must be supplied as a power supply (Vsup). There are 16 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Considering the reliability of this device, it would be a good candidate for TR.
SN74AUC16373DGGR Features
48-TFSOP (0.240, 6.10mm Width) package
74AUC series
8 Bits
74AUC16373 family
48 pin count
48 pins
SN74AUC16373DGGR Applications
There are a lot of Texas Instruments SN74AUC16373DGGR Latches applications.
- Digital bus buffer
- Parallel Output
- Frequency dividing
- Pattern Generators
- Control circuits
- Multi-line decoders
- Automotive Infotainment
- TV Set-top Boxes
- Automotive Body Electronics
- Automotive Cluster
