SN74AUC16501DGVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AUC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74AUC16501 |
| Pin Count | 56 |
| Supply Voltage-Max (Vsup) | 2.7V |
| Power Supplies | 1.2/2.5V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Circuits | 18-Bit |
| Load Capacitance | 15pF |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Family | AUC |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Logic Type | Universal Bus Transceiver |
| Output Polarity | TRUE |
| Max I(ol) | 0.005 A |
| Prop. Delay@Nom-Sup | 4 ns |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 3.8 ns |
| Control Type | INDEPENDENT CONTROL |
| Translation | N/A |
| Height Seated (Max) | 1.2mm |
| Length | 11.3mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AUC16501DGVR Overview
It is embedded in the 56-TFSOP (0.173, 4.40mm Width) package. It is packaged in a way that resembles Cut Tape (CT). A 18-Bit circuit is used for achieving its superior flexibility as a result of its use of 18-Bit circuits. This electrical device has a logic type of Universal Bus Transceiver. Surface Mount is pointing towards the electronic part. The operating temperature should be higher than -40°C~85°C in order for the machine to function properly. The High/Low output current of 9mA 9mA makes it feature maximum design flexibility. An FPGA of this type belongs to the series 74AUC and belongs to the category of FPGAs. There is a supply voltage of 0.8V~2.7V that it operates on. It belongs to the 74AUC16501 family. There is one type of termination that is called the 56 termination, which consists in terminating a transmission line with a device that has an impedance that matches the characteristic impedance of the line itself. Keeping the supply voltage above 1.2V is necessary for normal operation of the device. 56 pins are included. There is an electronic part in this product that has been designed with 18 Bits. The 2 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. A Surface Mount-shaped electronic component is mounted here. It has 56 pins. This electronic device belongs to the family of AUC. Upon reaching 2.7V, the maximum supply voltage (Vsup) is reached. It is recommended that the supply voltage (Vsup) should be greater than 0.8V. It operates from 1.2/2.5V power supplies. It uses POSITIVE EDGE for its trigger. Based on its reliable performance, this device is well suited for TAPE AND REEL.
SN74AUC16501DGVR Features
56-TFSOP (0.173, 4.40mm Width) package
74AUC series
74AUC16501 family
56 pin count
56 pins
1.2/2.5V power supplies
SN74AUC16501DGVR Applications
There are a lot of Texas Instruments SN74AUC16501DGVR Universal Bus Functions applications.
- Arithmetic unit
- VCR
- Electric car
- Temperature detector circuits
- Audio
- Industrial plant
- General AND Logic Operation
- Digital Electronics
- Troubleshooting & Judgment
- Cell phone
