SN74AUC1G14DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AUC |
| JESD-609 Code | e4 |
| Feature | Schmitt Trigger |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Gates |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Base Part Number | 74AUC1G14 |
| Pin Count | 5 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Propagation Delay | 4 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 4 ns |
| Family | AUC |
| Logic Function | Buffer, Inverter, Schmitt Trigger |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Logic Type | Inverter |
| Max I(ol) | 0.009 A |
| Max Propagation Delay @ V, Max CL | 2.5ns @ 2.5V, 30pF |
| Schmitt Trigger | YES |
| Logic Level - Low | 0.22V ~ 0.58V |
| Logic Level - High | 0.5V ~ 1.56V |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUC1G14DCKR Overview
Shipping overseas is convenient with the part packed in 5-TSSOP, SC-70-5, SOT-353. Advanced packaging method Cut Tape (CT) is used to provide high reliability. It works based on the Inverter logic principle. This part needs a voltage of 0.8V~2.7V to function properly. Increasing operating temperature to around -40°C~85°C. Surface Mount is the location of the part. High and low output current states are both 9mA 9mA. This item is from the 74AUC series. A total of 5 terminations have been recorded. There are 1 functions that significantly improve the user experience. I would like to point out that this chip is part of AUC. Search with 74AUC1G14 if you are looking for device variants. A total of 5 pins are injected into the part body. The logic device can be mounted on the Surface Mount axis and is used in a wide range of applications. You can find the functions of the 5 pins in the datasheets. Quiescent parts carry 10μA current. There is a standard Gates logic device here. The device must be supplied with a minimum voltage of 0.8V. The supply voltage should not exceed 2.7V. A method of industry TR is included in the package. The operation uses 1 elements in total. In addition, it has Schmitt Trigger.
SN74AUC1G14DCKR Features
Inverter Logic Type
Operating Temperature: -40°C~85°C
AUC Family
Quiescent Current: 10μA
SN74AUC1G14DCKR Applications
There are a lot of Texas Instruments SN74AUC1G14DCKR Gates and Inverters applications.
- VCD
- Overvoltage and undervoltage protection
- Range hood
- Electricity for military and civilian life in areas without electricity
- Small ground power station
- VCR
- Illumination
- Flashlight
- Pocket PC
- Mountain power station
