banner_page

SN74AUC1G19DCKT

6 Terminations0.8V~2.7V 6 Pin 74AUC1G19 Signal switch74AUC Series 2 Outputs1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AUC1G19DCKT
  • Package: 6-TSSOP, SC-88, SOT-363
  • Datasheet: PDF
  • Stock: 654
  • Description: 6 Terminations0.8V~2.7V 6 Pin 74AUC1G19 Signal switch74AUC Series 2 Outputs1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-TSSOP, SC-88, SOT-363
Number of Pins 6
Weight 2.494758mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74AUC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
Termination SMD/SMT
ECCN Code EAR99
Type Decoder/Demultiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Decoder/Drivers
Packing Method TR
Technology CMOS
Voltage - Supply 0.8V~2.7V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.1V
Base Part Number 74AUC1G19
Pin Count 6
Number of Outputs 2
Max Output Current 9mA
Number of Elements 1
Circuit 1 x 1:2
Polarity Non-Inverting
Supply Voltage-Min (Vsup) 0.8V
Number of Bits 1
Propagation Delay 7.5 ns
Quiescent Current 10μA
Turn On Delay Time 7.5 ns
Family AUC
Logic Function Decoder, Demultiplexer, Demux
Current - Output High, Low 9mA 9mA
Supply Type Single
Max I(ol) 0.009 A
Prop. Delay@Nom-Sup 3 ns
Voltage Supply Source Single Supply
Input Conditioning STANDARD
Height 1.1mm
Length 2mm
Width 1.25mm
Thickness 900μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74AUC1G19DCKT Overview


Digital switch is provided in the 6-TSSOP, SC-88, SOT-363 for the purpose of saving board space.It is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses an analog IC Decoder/Demultiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of 0.8V~2.7V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 74AUC series, these multiplexers have a wide range of applications.Among its basic configurations are 6 terminations.In addition, it also has a base part number of 74AUC1G19, which can be used to find related parts.For multiplexer's system, a voltage of 1.1V is supplied.In this turn signal switch, there are 6 components that can be connected to each pin.GULL WING represents the end of conductors.Single is employed as its supply type.It is configured with 6 pins.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of AUC the logic switch is a member.In the signal multiplexer, there are 1 bits available.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 0.8V.The turn signal switch has 2 outputs designed for operation.The digital switch ic is an electronic part classified into Decoder/Drivers.No external influence consumes 10μA current of multiplexer ic.The switches package is packaged in a way which is consistent with TR.There are 1 elements used for the mux switch configuration.

SN74AUC1G19DCKT Features


Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single

SN74AUC1G19DCKT Applications


There are a lot of Texas Instruments SN74AUC1G19DCKT Signal Switches / Multiplexers / Decoders applications.

  • GLAN
  • Seven segment displays
  • Relay
  • Small scale TV wall
  • Transmission from the computer system of a satellite
  • Used to connect a single source to multiple destinations
  • Video transmission
  • VGA
  • HDMI applications
  • Image transmission

Write a review

Note: HTML is not translated!
    Bad           Good