SN74AUC1G66YZPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-XFBGA, DSBGA |
| Number of Pins | 5 |
| Weight | 1.587573mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.65V |
| Base Part Number | 74AUC1G66 |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 10μA |
| Max Supply Current | 10μA |
| Throw Configuration | SPST |
| Propagation Delay | 100 ps |
| Turn On Delay Time | 2.2 ns |
| Supply Type | Single |
| Bandwidth | 170MHz |
| Turn-Off Delay Time | 1.4 ns |
| -3db Bandwidth | 50MHz |
| On-State Resistance (Max) | 15Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 2pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 1.4ns, 1.5ns |
| Switch-off Time-Max | 2.9ns |
| Voltage - Supply, Single (V+) | 0.8V~2.7V |
| Height | 500μm |
| Length | 1.75mm |
| Width | 1.25mm |
| Thickness | 310μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUC1G66YZPR Overview
This electronic part is conveniently packaged in 5-XFBGA, DSBGA, making it easy to ship abroad. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~85°C TA is the extended operating temperature. In total, 5 terminations have occurred. The electronic part delivers high-quality output through its 1 channels. In the case of a voltage supply of 1.65V volts, the electrical part can be powered up and run. A total of 5 pins are injected into the electrical part body. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Using the 74AUC1G66 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 15Ohm. For details about the functions of 5 pins, please refer to the datasheets. Users shouldn't supply more than 2.7V voltage to the switch device. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 800mV. It would be sufficient to run this analogue multiplexer with 10μA current. Analogue multiplexers require a 0.8V~2.7V voltage to drain from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 10μA. In 170MHz-bandwidths, data can be transferred.
SN74AUC1G66YZPR Features
1 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 50MHz
Bandwidth: 170MHz
SN74AUC1G66YZPR Applications
There are a lot of Texas Instruments SN74AUC1G66YZPR Analog Switches & Multiplexers ICs applications.
- PDAs
- Modems
- Automotive applications
- Medical systems
- PBX interfaces
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Voice over IP/DSL – Integrated Access Devices, Smart
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- CSU
- Video signal routing
