SN74AUC1G74DCTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) |
| Number of Pins | 8 |
| Weight | 23.388357mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AUC1G74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 2.7V |
| Number of Circuits | 1 |
| Output Current | 9mA |
| Number of Bits | 1 |
| Clock Frequency | 275MHz |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 9.5 ns |
| Family | AUC |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Max I(ol) | 0.009 A |
| Max Propagation Delay @ V, Max CL | 1.8ns @ 2.5V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| fmax-Min | 275 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 200000000Hz |
| Height | 1.3mm |
| Length | 2.95mm |
| Width | 2.8mm |
| Thickness | 1.29mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUC1G74DCTR Overview
The item is packaged in 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)cases. The Tape & Reel (TR)package contains it. T flip flop uses Differentialas its output configuration. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The supply voltage is set to 0.8V~2.7V. The operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. This type of FPGA is a part of the 74AUC series. A frequency of 275MHzshould be the maximum output frequency. Despite external influences, it consumes 10μAof quiescent current. Terminations are 8. The 74AUC1G74 family contains this object. It is powered by a voltage of 1.2V . Its input capacitance is 2.5pFfarads. AUCis the family of this D flip flop. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 8 pins. This device has the clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. Flip flops designed with 1bits are used in this part. There is a 2.7Vmaximum supply voltage (Vsup). 1 circuits are used to achieve its superior flexibility. Considering its reliability, this T flip flop is well suited for TR. Featuring the maximum design flexibility, it has an output current of 9mA .
SN74AUC1G74DCTR Features
Tape & Reel (TR) package
74AUC series
8 pins
1 Bits
SN74AUC1G74DCTR Applications
There are a lot of Texas Instruments SN74AUC1G74DCTR Flip Flops applications.
- ESCC
- Asynchronous counter
- Balanced Propagation Delays
- Data transfer
- Clock pulse
- Latch
- Guaranteed simultaneous switching noise level
- Divide a clock signal by 2 or 4
- Matched Rise and Fall
- Automotive
