SN74AUC1G74DCTRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 8 |
| Weight | 23.388357mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 800mV |
| Propagation Delay | 2.4 ns |
| Turn On Delay Time | 9.5 ns |
| Family | AUC |
| Logic Function | AND, D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.005 A |
| Number of Bits per Element | 1 |
| High Level Output Current | -9mA |
| Low Level Output Current | 9mA |
| fmax-Min | 275 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 2.95mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AUC1G74DCTRE4 Overview
The package is in the form of SSOP. D flip flop is included in the Tape & Reel (TR)package. There are 8 terminations,Power is provided by a 1.2V supply. AUCis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. It is designed with 8 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device has the base part number FF/Latches. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. -9mA is set as the high level output current. In the low level output current setting, the current is set to 9mA. There should be a temperature below 85°Cduring operation. Operating temperatures should be above -40°C. Initially, it requires a voltage of 800mV as the minimum supply voltage. In this case, it supports a maximum supply voltage of 2.7V. It is possible to achieve a frequency of 50MHz. The logic IC it adopts is D FLIP-FLOP. Currently, it is equipped with 1 functions . There are 8 pins on the D latch.
SN74AUC1G74DCTRE4 Features
Tape & Reel (TR) package
8 pins
1 Functions
8 pin count
SN74AUC1G74DCTRE4 Applications
There are a lot of Texas Instruments SN74AUC1G74DCTRE4 Flip Flops applications.
- Computers
- Data Synchronizers
- Differential Individual
- ATE
- Frequency Dividers
- Balanced 24 mA output drivers
- Guaranteed simultaneous switching noise level
- Pattern generators
- Parallel data storage
- Divide a clock signal by 2 or 4
