SN74AUC1G74YZPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFBGA, DSBGA |
| Number of Pins | 8 |
| Weight | 2.296311mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUC |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AUC1G74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 2.7V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 275MHz |
| Propagation Delay | 2.4 ns |
| Turn On Delay Time | 9.5 ns |
| Family | AUC |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Max I(ol) | 0.009 A |
| Max Propagation Delay @ V, Max CL | 1.8ns @ 2.5V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| fmax-Min | 275 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 200000000Hz |
| Height | 500μm |
| Length | 1.25mm |
| Width | 2.25mm |
| Thickness | 310μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUC1G74YZPR Overview
The item is packaged in 8-XFBGA, DSBGAcases. There is an embedded version in the package Tape & Reel (TR). T flip flop uses Differentialas the output. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Surface Mount. Powered by a 0.8V~2.7Vvolt supply, it operates as follows. In this case, the operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of 74AUCseries FPGA. You should not exceed 275MHzin the output frequency of the device. T flip flop consumes 10μA quiescent energy. The number of terminations is 8. You can search similar parts based on 74AUC1G74. A voltage of 1.2V provides power to the D latch. This T flip flop has a capacitance of 2.5pF farads at the input. It is a member of the AUCfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. It is designed with 8 pins. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. The design is based on 1bits. 2.7Vis the maximum supply voltage (Vsup). In order to achieve its superior flexibility, 1 circuits are used. Due to its reliability, this T flip flop is well suited for TR.
SN74AUC1G74YZPR Features
Tape & Reel (TR) package
74AUC series
8 pins
1 Bits
SN74AUC1G74YZPR Applications
There are a lot of Texas Instruments SN74AUC1G74YZPR Flip Flops applications.
- Control circuits
- Buffer registers
- Consumer
- Memory
- Computers
- Single Up Count-Control Line
- Storage Registers
- Frequency Dividers
- Instrumentation
- Functionally equivalent to the MC10/100EL29
