SN74AUC1G79DCKRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AUC1G79 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Circuits | 1 |
| Output Current | 9mA |
| Number of Bits | 1 |
| Clock Frequency | 275MHz |
| Propagation Delay | 2.4 ns |
| Turn On Delay Time | 5 ns |
| Family | AUC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Max I(ol) | 0.009 A |
| Max Propagation Delay @ V, Max CL | 1.8ns @ 2.5V, 30pF |
| Prop. Delay@Nom-Sup | 3.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 200000000Hz |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUC1G79DCKRE4 Overview
In the form of 5-TSSOP, SC-70-5, SOT-353, it has been packaged. It is included in the package Tape & Reel (TR). This output is configured with Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountmounts this electrical part. Powered by a 0.8V~2.7Vvolt supply, it operates as follows. It is operating at a temperature of -40°C~85°C TA. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74AUC series. You should not exceed 275MHzin its output frequency. During its operation, it consumes 10μA quiescent energy. It has been determined that there have been 5 terminations. The 74AUC1G79 family contains it. A voltage of 1.2V is used to power it. JK flip flop input capacitance is 2.5pF farads. It belongs to the family of electronic devices known as AUC. There is an electronic part that is mounted in the way of Surface Mount. With its 5pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. The part is included in FF/Latches. This flip flop is designed with 1 Bits. It reaches the maximum supply voltage (Vsup) at 2.7V. Normal operation requires a supply voltage (Vsup) above 0.8V. To achieve this superior flexibility, 1 circuits are used. Considering the reliability of this T flip flop, it is well suited for TR. The output current of 9mA makes it feature maximum design flexibility.
SN74AUC1G79DCKRE4 Features
Tape & Reel (TR) package
74AUC series
5 pins
1 Bits
SN74AUC1G79DCKRE4 Applications
There are a lot of Texas Instruments SN74AUC1G79DCKRE4 Flip Flops applications.
- Shift Registers
- 2 – Bit synchronous counter
- Frequency division
- QML qualified product
- Storage registers
- Latch
- Computing
- Patented noise
- Pattern generators
- Parallel data storage
