SN74AUC1G79YZPR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-XFBGA, DSBGA |
| Number of Pins | 5 |
| Weight | 1.587573mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUC |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Base Part Number | 74AUC1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Circuits | 1 |
| Output Current | 9mA |
| Number of Bits | 1 |
| Clock Frequency | 275MHz |
| Propagation Delay | 2.4 ns |
| Turn On Delay Time | 5 ns |
| Family | AUC |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Max Propagation Delay @ V, Max CL | 1.8ns @ 2.5V, 30pF |
| Prop. Delay@Nom-Sup | 3.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 200000000Hz |
| Width | 0.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AUC1G79YZPR Overview
The flip flop is packaged in 5-XFBGA, DSBGA. As part of the package Tape & Reel (TR), it is embedded. The output it is configured with uses Non-Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. Powered by a 0.8V~2.7Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis used in the operation. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 74AUCseries FPGA. A frequency of 275MHzshould not be exceeded by its output. As a result, it consumes 10μA quiescent current and is not affected by external forces. There have been 5 terminations. The 74AUC1G79 family contains it. The power supply voltage is 1.2V. Input capacitance of this device is 2.5pF farads. Devices in the AUCfamily are electronic devices. It is mounted by the way of Surface Mount. As you can see from the design, it has pins with 5. This device exhibits a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. 1bits are used in its design. It reaches 2.7Vwhen the supply voltage is maximal (Vsup). The supply voltage (Vsup) should be kept above 0.8V for normal operation. Using 1 circuits, it is highly flexible. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. With an output current of 9mA, this device offers maximum design flexibility.
SN74AUC1G79YZPR Features
Tape & Reel (TR) package
74AUC series
5 pins
1 Bits
SN74AUC1G79YZPR Applications
There are a lot of Texas Instruments SN74AUC1G79YZPR Flip Flops applications.
- ESD performance
- Communications
- Single Up Count-Control Line
- Circuit Design
- Data Synchronizers
- High Performance Logic for test systems
- Digital electronics systems
- Asynchronous counter
- ESCC
- Parallel data storage
