SN74AUC1G80YEPR
| Parameters | |
|---|---|
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AUC1G80 |
| JESD-30 Code | R-XBGA-B5 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Inverted |
| Number of Elements | 1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Bits | 1 |
| Clock Frequency | 275MHz |
| Turn On Delay Time | 5 ns |
| Family | AUC |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Max I(ol) | 0.005 A |
| Max Propagation Delay @ V, Max CL | 1.8ns @ 2.5V, 30pF |
| Prop. Delay@Nom-Sup | 3.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| Propagation Delay (tpd) | 3.9 ns |
| fmax-Min | 275 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 200000000Hz |
| Height Seated (Max) | 0.5mm |
| Width | 0.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-XFBGA, DSBGA |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | BOTTOM |
SN74AUC1G80YEPR Overview
As a result, it is packaged as 5-XFBGA, DSBGA. D flip flop is embedded in the Tape & Reel (TR) package. T flip flop uses Invertedas the output. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 0.8V~2.7Vis used as the supply voltage. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. In this case, it is a type of FPGA belonging to the 74AUC series. It should not exceed 275MHzin terms of its output frequency. In total, it contains 1 elements. There is a consumption of 10μAof quiescent energy. A total of 5 terminations have been made. You can search similar parts based on 74AUC1G80. Power is supplied from a voltage of 1.2V volts. This JK flip flop has a 2.5pFfarad input capacitance. In this case, the D flip flop belongs to the AUCfamily. There is an electronic part that is mounted in the way of Surface Mount. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number FF/Latches. It is designed with a number of bits of 1. It reaches 2.7Vwhen the maximum supply voltage (Vsup) is applied. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 0.8V. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL.
SN74AUC1G80YEPR Features
Tape & Reel (TR) package
74AUC series
1 Bits
SN74AUC1G80YEPR Applications
There are a lot of Texas Instruments SN74AUC1G80YEPR Flip Flops applications.
- Communications
- Single Up Count-Control Line
- Consumer
- Count Modes
- Common Clocks
- Computers
- Data transfer
- Single Down Count-Control Line
- Digital electronics systems
- Buffered Clock
