SN74AUC2G53DCUR

2.2ns, 2.3ns SPDT 15Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74AUC2G53 8 Pins 1μA 1.1V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74AUC2G53DCUR
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 451
Description: 2.2ns, 2.3ns SPDT 15Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74AUC2G53 8 Pins 1μA 1.1V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	15Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.1V
Terminal Pitch	0.5mm
Base Part Number	74AUC2G53
Pin Count	8
Number of Channels	2
Number of Circuits	1
Max Supply Voltage	2.7V
Min Supply Voltage	800mV
Operating Supply Current	10μA
Max Supply Current	10μA
Propagation Delay	100 ps
Turn On Delay Time	9.2 ns
Input Voltage (Max)	3.6V
Number of Inputs	2
Supply Type	Single
Bandwidth	198MHz
Turn-Off Delay Time	10 ns
-3db Bandwidth	50MHz
On-State Resistance (Max)	15Ohm
High Level Output Current	50mA
Low Level Output Current	50mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	59 dB
Current - Leakage (IS(off)) (Max)	1μA
Channel Capacitance (CS(off), CD(off))	2pF
On-state Resistance Match-Nom	4Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	2.2ns, 2.3ns
Channel-to-Channel Matching (ΔRon)	1 Ω (Max)
Crosstalk	-60dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	3.6ns
Switch-off Time-Max	3.6ns
Voltage - Supply, Single (V+)	0.8V~2.7V
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74AUC2G53DCUR Overview

The electrical component comes in 8-VFSOP (0.091, 2.30mm Width) packaging, which makes it convenient to ship overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 8. The electronic part provides high-quality output because it has 2 channels. Turning on and running the electrical part should be easy with a 1.1V voltage supply. This electronic part can be found in the 8 series. A SPDT switching circuit is used for these analog switches. 1 circuits are used in this analogue multiplexer. 74AUC2G53 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 15Ohm. To find out what the functions of 8 pins are, please refer to their datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 2.7V volts for the multiplexer. The digital multiplexer has a low cost Single supply. 800mV is the lowest voltage that should be fed to the electronic electronic part. 10μA current would be enough for this multiplexer to operate. This analogue multiplexer requires a voltage of 0.8V~2.7V when it drains from a single voltage supply. A voltage higher than 10μA may cause damage to the switch multiplexer. It is possible to operate 2 inputs. The transfer of data can be performed over 198MHz bandwidths.