SN74AUC2G53YZPR

2.2ns, 2.3ns SPDT 15Ohm BOTTOM Analog Switches MAKE-BEFORE-BREAK 74AUC2G53 8 Pins 1μA 1.1V 8-XFBGA, DSBGA

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74AUC2G53YZPR
Package: 8-XFBGA, DSBGA
Datasheet: -
Stock: 965
Description: 2.2ns, 2.3ns SPDT 15Ohm BOTTOM Analog Switches MAKE-BEFORE-BREAK 74AUC2G53 8 Pins 1μA 1.1V 8-XFBGA, DSBGA(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-XFBGA, DSBGA
Number of Pins	8
Weight	2.296311mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	15Ohm
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.1V
Terminal Pitch	0.5mm
Base Part Number	74AUC2G53
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	2
Number of Circuits	1
Max Supply Voltage	2.7V
Min Supply Voltage	800mV
Operating Supply Current	10μA
Max Supply Current	10μA
Propagation Delay	100 ps
Turn On Delay Time	9.2 ns
Input Voltage (Max)	3.6V
Number of Inputs	2
Supply Type	Single
Bandwidth	198MHz
Turn-Off Delay Time	10 ns
-3db Bandwidth	50MHz
On-State Resistance (Max)	15Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	59 dB
Current - Leakage (IS(off)) (Max)	1μA
Channel Capacitance (CS(off), CD(off))	2pF
On-state Resistance Match-Nom	4Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	2.2ns, 2.3ns
Channel-to-Channel Matching (ΔRon)	1 Ω (Max)
Crosstalk	-60dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	3.6ns
Switch-off Time-Max	3.6ns
Voltage - Supply, Single (V+)	0.8V~2.7V
Height	500μm
Length	1.25mm
Width	2.25mm
Thickness	310μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74AUC2G53YZPR Overview

Due to its 8-XFBGA, DSBGA packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. 2:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 8. This electronic part offers high-quality output due to its 2 channels. If the voltage supply is 1.1V volts, the electrical component should be turned on and run. A total of 8 pins are injected into the electrical part body. Based on SPDT switching circuits, these analog multiplexers work. The multiplexer consists of 1 circuits. Look for analog switch ic variants by searching with 74AUC2G53. Analog switches have 15Ohm internal resistance. You can find the functions of the 8 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 2.7V. A analog switch ic that has a cost-effective Single supply type. The lowest voltage the electronic part should receive is 800mV. The switch device would be able to operate with 10μA current. This analogue multiplexer requires a voltage of 0.8V~2.7V when it drains from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 10μA. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. The electrical component supports 2 inputs. There are various bandwidths available for data transfer.