SN74AUC2G66DCUR

2.3ns, 2ns SPST - NO 15Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74AUC2G66 8 Pins 1μA 1.1V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74AUC2G66DCUR
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 856
Description: 2.3ns, 2ns SPST - NO 15Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74AUC2G66 8 Pins 1μA 1.1V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Current - Leakage (IS(off)) (Max)	1μA
Channel Capacitance (CS(off), CD(off))	2.5pF
On-state Resistance Match-Nom	3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	2.3ns, 2ns
Channel-to-Channel Matching (ΔRon)	1 Ω (Max)
Crosstalk	-60dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	3ns
Voltage - Supply, Single (V+)	0.8V~2.7V
Normal Position	NO
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	10.007382mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	15Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.1V
Terminal Pitch	0.5mm
Base Part Number	74AUC2G66
Pin Count	8
Polarity	Non-Inverting
Number of Channels	2
Max Supply Voltage	2.7V
Min Supply Voltage	800mV
Operating Supply Current	10μA
Max Supply Current	10μA
Throw Configuration	SPST
Propagation Delay	400 ps
Turn On Delay Time	2.7 ns
Supply Type	Single
Bandwidth	500MHz
Turn-Off Delay Time	3.4 ns
-3db Bandwidth	50MHz
On-State Resistance (Max)	15Ohm
High Level Output Current	50mA
Low Level Output Current	50mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	50 dB

SN74AUC2G66DCUR Overview

Shipping overseas is convenient with the electronic component packed in 8-VFSOP (0.091, 2.30mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. Total terminations are 8. The electronic part delivers high-quality output through its 2 channels. If the voltage supply is 1.1V volts, the electrical component should be turned on and run. It is injected into the electrical part body with 8 pins. These analog multiplexers are built based on SPST - NO switching circuits. Try searching for 74AUC2G66 variants of the analog switch ic. It has an internal resistance of 15Ohm. You can find the functions of the 8 pins in the datasheets. This switch device is a typical Multiplexer or Switches. A voltage higher than 2.7V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 800mV. An operating current of 10μA would be sufficient for this switch device. Using only a single voltage supply, this analog switch requires 0.8V~2.7V voltage. A voltage higher than 10μA may cause damage to the switch multiplexer. This switch operates within the bandwidth of 500MHz.