SN74AUC2G66YZPR

2.3ns, 2ns SPST - NO 15Ohm BOTTOM Analog Switches MAKE-BEFORE-BREAK 74AUC2G66 8 Pins 1μA 1.1V 8-XFBGA, DSBGA

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74AUC2G66YZPR
Package: 8-XFBGA, DSBGA
Datasheet: -
Stock: 154
Description: 2.3ns, 2ns SPST - NO 15Ohm BOTTOM Analog Switches MAKE-BEFORE-BREAK 74AUC2G66 8 Pins 1μA 1.1V 8-XFBGA, DSBGA(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-XFBGA, DSBGA
Number of Pins	8
Weight	2.296311mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	15Ohm
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.1V
Terminal Pitch	0.5mm
Base Part Number	74AUC2G66
Output	COMMON OUTPUT
Pin Count	8
Number of Channels	2
Max Supply Voltage	2.7V
Min Supply Voltage	800mV
Operating Supply Current	10μA
Max Supply Current	10μA
Throw Configuration	SPST
Propagation Delay	400 ps
Turn On Delay Time	2.7 ns
Supply Type	Single
Bandwidth	500MHz
Turn-Off Delay Time	3.4 ns
-3db Bandwidth	50MHz
On-State Resistance (Max)	15Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	1μA
Channel Capacitance (CS(off), CD(off))	2.5pF
On-state Resistance Match-Nom	3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	2.3ns, 2ns
Channel-to-Channel Matching (ΔRon)	1 Ω (Max)
Crosstalk	-60dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	3ns
Voltage - Supply, Single (V+)	0.8V~2.7V
Normal Position	NO
Height	500μm
Length	1.25mm
Width	2.25mm
Thickness	310μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74AUC2G66YZPR Overview

Shipping overseas is convenient with the electronic component packed in 8-XFBGA, DSBGA. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. A total of 8 terminations have been recorded. By its 2 channels, the electronic component provides high-quality output. Powered by a 1.1V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 8 pins. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching with 74AUC2G66 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 15Ohm. To find out what the 8 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 2.7V voltage to the switch device. Analogue multiplexers of the Single supply type that are cost-effective. There should be 800mV voltage fed to the electrical part below 800mV. The switch device would be able to operate with 10μA current. The voltage required by this switch device is 0.8V~2.7V, draining from a single voltage supply. When the digital multiplexer is charged above 10μA, damage can occur. COMMON OUTPUT outputs are utilized by this digital multiplexer. There are 500MHz bandwidths for data transfer.