SN74AUC2G79YEPR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFBGA, DSBGA |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AUC2G79 |
| JESD-30 Code | R-XBGA-B8 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 0.8V |
| Clock Frequency | 275MHz |
| Turn On Delay Time | 5 ns |
| Family | AUC |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 9mA 9mA |
| Max I(ol) | 0.005 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 1.8ns @ 2.5V, 30pF |
| Prop. Delay@Nom-Sup | 3.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| Propagation Delay (tpd) | 3.9 ns |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 0.5mm |
| Width | 0.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AUC2G79YEPR Overview
It is packaged in the way of 8-XFBGA, DSBGA. A package named Tape & Reel (TR)includes it. T flip flop is configured with an output of Non-Inverted. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 0.8V~2.7Vis required for its operation. It is operating at -40°C~85°C TA. This electronic flip flop is of type D-Type. It belongs to the 74AUCseries of FPGAs. Its output frequency should not exceed 275MHz. In total, it contains 2 elements. Despite external influences, it consumes 10μAof quiescent current. It has been determined that there have been 8 terminations. The 74AUC2G79 family contains this object. The power supply voltage is 1.2V. There is 2.5pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as AUC. It is mounted in the way of Surface Mount. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. Normally, the supply voltage (Vsup) should be above 0.8V. This D flip flop is well suited for TAPE AND REEL based on its reliable performance.
SN74AUC2G79YEPR Features
Tape & Reel (TR) package
74AUC series
SN74AUC2G79YEPR Applications
There are a lot of Texas Instruments SN74AUC2G79YEPR Flip Flops applications.
- ESCC
- Asynchronous counter
- Test & Measurement
- Reduced system switching noise
- Computers
- Pattern generators
- Divide a clock signal by 2 or 4
- Automotive
- Instrumentation
- Frequency Dividers
