SN74AUC32374ZKER
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Number of Pins | 96 |
| Weight | 166.610147mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUC |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 96 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Base Part Number | 74AUC32374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 2.7V |
| Power Supplies | 1.2/2.5V |
| Load Capacitance | 15pF |
| Number of Ports | 2 |
| Number of Bits | 32 |
| Clock Frequency | 250MHz |
| Propagation Delay | 2.8 ns |
| Turn On Delay Time | 7.3 ns |
| Family | AUC |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Max I(ol) | 0.005 A |
| Max Propagation Delay @ V, Max CL | 2.2ns @ 2.5V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 250000000Hz |
| Height | 1.4mm |
| Length | 13.5mm |
| Width | 5.5mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUC32374ZKER Overview
In the form of 96-LFBGA, it has been packaged. You can find it in the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. Powered by a 0.8V~2.7Vvolt supply, it operates as follows. Temperature is set to -40°C~85°C TA. D-Typeis the type of this D latch. This type of FPGA is a part of the 74AUC series. A frequency of 250MHzshould be the maximum output frequency. In total, it contains 4 elements. It consumes 40μA of quiescent It has been determined that there have been 96 terminations. D latch belongs to the 74AUC32374 family. It is powered by a voltage of 1.2V . The input capacitance of this JK flip flopis 3pF farads. In terms of electronic devices, this device belongs to the AUCfamily of devices. Electronic part Surface Mountis mounted in the way. It is designed with 96 pins. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. The flip flop is designed with 32bits. As soon as Vsup reaches 2.7V, the maximum supply voltage is reached. As a result of its reliability, this D flip flop is ideally suited for TR. An electrical current of 1.2/2.5V volts is applied to it. The flip flop has 2ports embedded within it. In order to operate, the chip has 8 output lines.
SN74AUC32374ZKER Features
Tape & Reel (TR) package
74AUC series
96 pins
32 Bits
1.2/2.5V power supplies
SN74AUC32374ZKER Applications
There are a lot of Texas Instruments SN74AUC32374ZKER Flip Flops applications.
- Registers
- Communications
- Balanced 24 mA output drivers
- Storage registers
- Supports Live Insertion
- Matched Rise and Fall
- Memory
- Data storage
- Memory
- Pattern generators
