SN74AUCH32374GKER
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Number of Pins | 96 |
| Weight | 174.20782mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUCH |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 96 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 1.2V |
| Base Part Number | 74AUCH32374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 2.7V |
| Power Supplies | 1.2/2.5V |
| Load Capacitance | 15pF |
| Number of Ports | 2 |
| Number of Bits | 32 |
| Clock Frequency | 250MHz |
| Propagation Delay | 2.8 ns |
| Turn On Delay Time | 7.3 ns |
| Family | AUC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Max I(ol) | 0.005 A |
| Max Propagation Delay @ V, Max CL | 2.2ns @ 2.5V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 250000000Hz |
| Length | 13.5mm |
| Width | 5.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AUCH32374GKER Overview
In the form of 96-LFBGA, it has been packaged. Package Tape & Reel (TR)embeds it. There is a Tri-State, Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 0.8V~2.7V. The operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. The 74AUCHseries comprises this type of FPGA. A frequency of 250MHzshould not be exceeded by its output. In total, it contains 4 elements. During its operation, it consumes 40μA quiescent energy. A total of 96terminations have been recorded. It is a member of the 74AUCH32374 family. A voltage of 1.2V is used to power it. Input capacitance of this device is 3pF farads. AUCis the family of this D flip flop. A part of the electronic system is mounted in the way of Surface Mount. There are 96pins on it. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. It is designed with a number of bits of 32. It reaches the maximum supply voltage (Vsup) at 2.7V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The system runs on a power supply of 1.2/2.5V watts. A total of 2ports are embedded in the D flip flop. In order for the chip to function, it has 8output lines.
SN74AUCH32374GKER Features
Tape & Reel (TR) package
74AUCH series
96 pins
32 Bits
1.2/2.5V power supplies
SN74AUCH32374GKER Applications
There are a lot of Texas Instruments SN74AUCH32374GKER Flip Flops applications.
- Storage registers
- Asynchronous counter
- Parallel data storage
- Matched Rise and Fall
- 2 – Bit synchronous counter
- Load Control
- Power down protection
- Automotive
- Differential Individual
- Divide a clock signal by 2 or 4
