SN74AUCH32374ZKER
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | LIFEBUY (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Number of Pins | 96 |
| Weight | 166.610147mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUCH |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 96 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Base Part Number | 74AUCH32374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 2.7V |
| Power Supplies | 1.2/2.5V |
| Load Capacitance | 15pF |
| Number of Ports | 2 |
| Number of Bits | 32 |
| Clock Frequency | 250MHz |
| Propagation Delay | 2.8 ns |
| Turn On Delay Time | 7.3 ns |
| Family | AUC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Max I(ol) | 0.009 A |
| Max Propagation Delay @ V, Max CL | 2.2ns @ 2.5V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 250000000Hz |
| Height | 1.4mm |
| Length | 13.5mm |
| Width | 5.5mm |
| Thickness | 850μm |
| Radiation Hardening | No |
SN74AUCH32374ZKER Overview
96-LFBGAis the packaging method. It is included in the package Tape & Reel (TR). This output is configured with Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 0.8V~2.7V. It is operating at -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74AUCHseries of FPGAs. You should not exceed 250MHzin the output frequency of the device. The element count is 4 . As a result, it consumes 40μA of quiescent current without being affected by external factors. There have been 96 terminations. This D latch belongs to the family of 74AUCH32374. The D flip flop is powered by a voltage of 1.2V . The input capacitance of this JK flip flopis 3pF farads. In this case, the D flip flop belongs to the AUCfamily. Surface Mount mounts this electronic component. 96pins are included in its design. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. It is designed with a number of bits of 32. As soon as 2.7Vis reached, Vsup reaches its maximum value. In view of its reliability, this D flip flop is a good fit for TR. An electrical current of 1.2/2.5V volts is applied to it. This flip flop has a total of 2ports. There are 8 output lines in this JK flip flop.
SN74AUCH32374ZKER Features
Tape & Reel (TR) package
74AUCH series
96 pins
32 Bits
1.2/2.5V power supplies
SN74AUCH32374ZKER Applications
There are a lot of Texas Instruments SN74AUCH32374ZKER Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Data Synchronizers
- Circuit Design
- Computers
- Shift Registers
- Instrumentation
- 2 – Bit synchronous counter
- Synchronous counter
- Balanced Propagation Delays
- Functionally equivalent to the MC10/100EL29
