SN74AUP1G00DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Gates |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Base Part Number | 74AUP1G00 |
| Pin Count | 5 |
| Max Output Current | 4mA |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Load Capacitance | 30pF |
| Output Current | 4mA |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 500nA |
| Turn On Delay Time | 21.9 ns |
| Family | AUP/ULP/V |
| Logic Function | NAND |
| Number of Inputs | 2 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | NAND Gate |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 6.5ns @ 3.3V, 30pF |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.7V ~ 0.9V |
| Logic Level - High | 1.6V ~ 2V |
| Power Supply Current-Max (ICC) | 0.0009mA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUP1G00DBVT Overview
This part is conveniently packaged in SC-74A, SOT-753, making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. NAND Gate logic is the basis of its operation. The part must have a voltage of 0.8V~3.6V in order to function properly. Operational temperature extended around -40°C~85°C. There is a hole in Surface Mount for mounting the part. Current output is 4mA 4mA in both the high and low states. It comes from the 74AUP series. There are 5 terminations totally. A significant improvement in the user experience can be achieved by the part since it has 1 functions. The chip is part of the AUP/ULP/V family. Try searching with 74AUP1G00 if you're looking for device variants. The part body is injected with 5 pins. This logic device is widely used in a wide variety of applications because it is Surface Mount mounted. Datasheets for functions of 5 pins are available. A 2 input is supported by the part. It has 500nA current flowing through it when it is quiescent. It is a typical Gates logic device. In this part, the load capacitance is 30pF. The device must be supplied with a minimum voltage of 0.8V. The supply voltage should not exceed 3.6V. It is packed with the industry TR method. There is 4mA output current rated for the device. Operation is based on 1 elements in total.
SN74AUP1G00DBVT Features
NAND Gate Logic Type
Operating Temperature: -40°C~85°C
AUP/ULP/V Family
Quiescent Current: 500nA
Output Current: 4mA
SN74AUP1G00DBVT Applications
There are a lot of Texas Instruments SN74AUP1G00DBVT Gates and Inverters applications.
- Range hood
- Illumination
- Hair dryer
- Washing machine
- Roof distributed power station
- In-vehicle system
- Photovoltaic grid-connected power system
- Reactive power compensation function
- Scanner
- Troubleshooting & Judgment
