SN74AUP1G00YEPR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-XFBGA, DSBGA |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Subcategory | Gates |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AUP1G00 |
| Pin Count | 5 |
| JESD-30 Code | R-XBGA-B5 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Circuits | 1 |
| Load Capacitance | 30pF |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 500nA |
| Family | AUP/ULP/V |
| Logic Function | NAND |
| Number of Inputs | 2 |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | NAND Gate |
| Max Propagation Delay @ V, Max CL | 6.5ns @ 3.3V, 30pF |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.7V ~ 0.9V |
| Logic Level - High | 1.6V ~ 2V |
| Height Seated (Max) | 0.5mm |
| Width | 0.9mm |
| RoHS Status | ROHS3 Compliant |
SN74AUP1G00YEPR Overview
This part is conveniently packaged in 5-XFBGA, DSBGA, making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). This logic works according to the NAND Gate principle. The part must have a voltage of 0.8V~3.6V in order to function properly. Operating temperature extended to -40°C~85°C. It is mounted in position Surface Mount. 4mA 4mA output current is 4mA 4mA in the high or low state. 74AUP is the series it belongs to. The total number of terminations is 5. There are 1 features that significantly enhance the user experience. I would like to point out that this chip is part of AUP/ULP/V. If you are looking for device variants, try search with 74AUP1G00. Part bodies are injected with 5 pins. Many applications require the use of this logic device with its Surface Mount mounting. Inputs are limited to 2. As the part is in a quiescent state, it has 500nA current flowing through it. Gates is a typical logic device. There are 1 circuits in this device. The part bears a load capacitance of 30pF. A minimum voltage of 0.8V is required to supply the device. The supply voltage should not exceed 3.6V. Contains the industry TAPE AND REEL method.
SN74AUP1G00YEPR Features
NAND Gate Logic Type
Operating Temperature: -40°C~85°C
AUP/ULP/V Family
Quiescent Current: 500nA
SN74AUP1G00YEPR Applications
There are a lot of Texas Instruments SN74AUP1G00YEPR Gates and Inverters applications.
- Communication
- Illumination
- Massager
- Electric grinding wheel
- MPPT function (maximum power point tracking)
- Island protection
- Solar energy generation
- Overcurrent/Short circuit protection
- Game console
- In-vehicle system
