SN74AUP1G06DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Feature | Open Drain |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Gates |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AUP1G06 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 4mA |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Channels | 1 |
| Load Capacitance | 30pF |
| Output Current | 4mA |
| Propagation Delay | 10.5 ns |
| Quiescent Current | 500nA |
| Turn On Delay Time | 16 ns |
| Family | AUP/ULP/V |
| Current - Output High, Low | - 4mA |
| Logic Type | Inverter |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 3.3V, 30pF |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.1V ~ 0.45V |
| Logic Level - High | 0V ~ 3.6V |
| Power Supply Current-Max (ICC) | 0.0009mA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUP1G06DBVT Overview
Packed in SC-74A, SOT-753, the part is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This logic works according to the Inverter principle. The part must have a voltage of 0.8V~3.6V in order to function properly. Around -40°C~85°C TA is the extended operating temperature. There is Surface Mount mounting in Surface Mount. Neither the high - 4mA low state of output current is - 4mA. The 74AUP series contains it. In total, there are 5 terminations. User experience is significantly enhanced by the part's 1 functions. I would like to point out that this chip is part of AUP/ULP/V. 74AUP1G06 can help you find device variants. A total of 5 pins are injected into the body of the part. There are many applications for this logic device, mounted at Surface Mount. To find out what the 5 pins do, please refer to the datasheets. Quiescent parts have 500nA current flowing through them. Gates is a typical logic device. A load capacitance of 30pF is provided by the part. Supplying the device requires a minimum voltage of 0.8V. Vsup reaches its maximum value at 3.6V. There is a method TR in it that is designed for the industry. Current output of the device is rated at 4mA. In this device, there are 1 outputs. In addition, it has Open Drain. It provides high-quality logic output, thanks to its 1 channels.
SN74AUP1G06DBVT Features
Inverter Logic Type
Operating Temperature: -40°C~85°C TA
AUP/ULP/V Family
Quiescent Current: 500nA
Output Current: 4mA
SN74AUP1G06DBVT Applications
There are a lot of Texas Instruments SN74AUP1G06DBVT Gates and Inverters applications.
- Ship
- Various travel, camping, medical emergency appliances
- Island protection
- Electricity for military and civilian life in areas without electricity
- VCR
- Pocket PC
- Photovoltaic grid-connected power system
- Roof distributed power station
- Car
- Remote monitoring
