SN74AUP1G06DCKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Feature | Open Drain |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Gate |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Base Part Number | 74AUP1G06 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Max Output Current | 4mA |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Channels | 1 |
| Load Capacitance | 30pF |
| Output Current | 4mA |
| Propagation Delay | 19.3 ns |
| Quiescent Current | 500nA |
| Turn On Delay Time | 7.1 ns |
| Family | AUP/ULP/V |
| Logic Function | Buffer, Inverter |
| Current - Output High, Low | - 4mA |
| Logic Type | Inverter |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 3.3V, 30pF |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.1V ~ 0.45V |
| Logic Level - High | 0V ~ 3.6V |
| Power Supply Current-Max (ICC) | 0.0009mA |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUP1G06DCKT Overview
Shipping overseas is convenient with the part packed in 5-TSSOP, SC-70-5, SOT-353. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Based on the Inverter logic principle, it works. A voltage of 0.8V~3.6V is needed to ensure full function of the part. Operational temperature extended around -40°C~85°C TA. There is Surface Mount mounting in Surface Mount. In the low and high states of output current, the current is - 4mA. The number 74AUP refers to it. 5 terminations have been made so far. In addition to 1 functions that significantly boost the user experience, the part includes 1 other features. As part of AUP/ULP/V, this chip is used. Trying searching with 74AUP1G06 will yield device variants. The part body is injected with 5 pins. Surface Mount mounted, this logic device is widely used in many applications. For details about the functions of 5 pins, please refer to the datasheets. It has 500nA current flowing through it when it is quiescent. In this logic device, the value is Gate. It has a capacitance of 30pF when loaded. Devices require a voltage of 0.8V to be powered. As soon as Vsup reaches 3.6V, the maximal supply voltage (Vsup) is reached. The method TR is packed into it. 4mA is the device's output current rating. A device with 1 outputs is available. There is Open Drain in it. With its 1 channels, the part provides high quality logic output.
SN74AUP1G06DCKT Features
Inverter Logic Type
Operating Temperature: -40°C~85°C TA
AUP/ULP/V Family
Quiescent Current: 500nA
Output Current: 4mA
SN74AUP1G06DCKT Applications
There are a lot of Texas Instruments SN74AUP1G06DCKT Gates and Inverters applications.
- Mountain power station
- Residual current/leakage current protection
- Laptop
- Electricity for military and civilian life in areas without electricity
- Air conditioner
- Troubleshooting & Judgment
- Audio
- Reactive power compensation function
- Refrigerator
- Overcurrent/Short circuit protection
