SN74AUP1G125YZPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-XFBGA, DSBGA |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Base Part Number | 74AUP1G125 |
| Pin Count | 5 |
| Output Type | 3-State |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Channels | 1 |
| Load Capacitance | 30pF |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 18.7 ns |
| Quiescent Current | 500nA |
| Turn On Delay Time | 25.5 ns |
| Family | AUP/ULP/V |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | Buffer, Non-Inverting |
| Max I(ol) | 0.004 A |
| Control Type | ENABLE LOW |
| Number of Output Lines | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 500μm |
| Length | 1.75mm |
| Width | 1.25mm |
| Thickness | 310μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUP1G125YZPR Overview
Logical driver uses a neat 5-XFBGA, DSBGA package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 0.8V~3.6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 4mA 4mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74AUP series devices. 5 terminations with different functions. Buffer IC reuqires a supply voltage of 1.2V. Electronic parts from the AUP/ULP/V family are used in this part. 5 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 5 pins. Enhanced with 2 ports. You can search "74AUP1G125" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 500nA. It is generally sold in TR package. To supply the device, a minimum voltage of 0.8V is a must. 1 bits are included within the electrical component. 1 channels for high quality communication. Wireless transceiver is able to output 1 lines.
SN74AUP1G125YZPR Features
Bus Driver/Transceivers
SN74AUP1G125YZPR Applications
There are a lot of Texas Instruments SN74AUP1G125YZPR Buffers & Transceivers applications.
- Point-to-point networking
- IP cameras
- VoIP phones
- WDM transmission
- Sensor reporting
- Wireless showroom
- Structural bonding
- Fiber optic cable connection network
- Shortwave receiver
- Car alarm systems
