SN74AUP1G79DBVR
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Base Part Number | 74AUP1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Circuits | 1 |
| Load Capacitance | 30pF |
| Output Current | 4mA |
| Number of Bits | 1 |
| Clock Frequency | 266MHz |
| Propagation Delay | 24 ns |
| Turn On Delay Time | 3 ns |
| Family | AUP/ULP/V |
| Current - Quiescent (Iq) | 500nA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 5.8ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.5pF |
| Power Supply Current-Max (ICC) | 0.0009mA |
| fmax-Min | 260 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 220000000Hz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
SN74AUP1G79DBVR Overview
The package is in the form of SC-74A, SOT-753. As part of the package Tape & Reel (TR), it is embedded. T flip flop uses Non-Invertedas its output configuration. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. The supply voltage is set to 0.8V~3.6V. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. FPGAs belonging to the 74AUPseries contain this type of chip. It should not exceed 266MHzin its output frequency. As a result, it consumes 500nA of quiescent current without being affected by external factors. A total of 5 terminations have been made. JK flip flop belongs to 74AUP1G79 family. The power source is powered by 1.2V. There is 1.5pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as AUP/ULP/V. It is mounted in the way of Surface Mount. There are 5pins on it. It has a clock edge trigger type of Positive Edge. This part is included in FF/Latches. There are 1bits in this flip flop. It reaches 3.6Vwhen the maximum supply voltage (Vsup) is applied. The supply voltage (Vsup) should be kept above 0.8V for normal operation. Despite its superior flexibility, it relies on 1 circuits to achieve it. Considering its reliability, this T flip flop is well suited for TR. This T flip flop features a maximum design flexibility due to its output current of 4mA.
SN74AUP1G79DBVR Features
Tape & Reel (TR) package
74AUP series
5 pins
1 Bits
SN74AUP1G79DBVR Applications
There are a lot of Texas Instruments SN74AUP1G79DBVR Flip Flops applications.
- Circuit Design
- CMOS Process
- Automotive
- Asynchronous counter
- Memory
- Clock pulse
- Shift Registers
- Divide a clock signal by 2 or 4
- Consumer
- Synchronous counter
