SN74AUP1G79DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AUP1G79 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Circuits | 1 |
| Load Capacitance | 30pF |
| Output Current | 4mA |
| Number of Bits | 1 |
| Clock Frequency | 266MHz |
| Propagation Delay | 17.3 ns |
| Turn On Delay Time | 3 ns |
| Family | AUP/ULP/V |
| Current - Quiescent (Iq) | 500nA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 5.8ns @ 3.3V, 30pF |
| Prop. Delay@Nom-Sup | 24 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.5pF |
| Power Supply Current-Max (ICC) | 0.0009mA |
| fmax-Min | 260 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 220000000Hz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUP1G79DBVT Overview
The package is in the form of SC-74A, SOT-753. A package named Tape & Reel (TR)includes it. As configured, the output uses Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. The supply voltage is set to 0.8V~3.6V. A temperature of -40°C~85°C TAis used in the operation. This D latch has the type D-Type. FPGAs belonging to the 74AUPseries contain this type of chip. Its output frequency should not exceed 266MHz Hz. T flip flop consumes 500nA quiescent energy. A total of 5terminations have been recorded. JK flip flop belongs to 74AUP1G79 family. A voltage of 1.2V provides power to the D latch. Its input capacitance is 1.5pFfarads. Electronic devices of this type belong to the AUP/ULP/Vfamily. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 5. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. There are 1bits in this flip flop. It reaches 3.6Vwhen the maximum supply voltage (Vsup) is applied. Keeping the supply voltage (Vsup) above 0.8V is necessary for normal operation. Using 1 circuits, it is highly flexible. A reliable performance of this D flip flop makes it well suited for use in TR. Its output current of 4mAallows for maximum design flexibility.
SN74AUP1G79DBVT Features
Tape & Reel (TR) package
74AUP series
5 pins
1 Bits
SN74AUP1G79DBVT Applications
There are a lot of Texas Instruments SN74AUP1G79DBVT Flip Flops applications.
- Data Synchronizers
- Event Detectors
- Shift Registers
- Buffer registers
- Shift registers
- Functionally equivalent to the MC10/100EL29
- Patented noise
- Buffered Clock
- ESD performance
- Power down protection
