SN74AUP1G79DCKR
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Base Part Number | 74AUP1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Circuits | 1 |
| Load Capacitance | 30pF |
| Output Current | 4mA |
| Number of Bits | 1 |
| Clock Frequency | 266MHz |
| Propagation Delay | 24 ns |
| Turn On Delay Time | 3 ns |
| Family | AUP/ULP/V |
| Current - Quiescent (Iq) | 500nA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 5.8ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.5pF |
| Power Supply Current-Max (ICC) | 0.0009mA |
| fmax-Min | 260 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 220000000Hz |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
SN74AUP1G79DCKR Overview
5-TSSOP, SC-70-5, SOT-353is the packaging method. A package named Tape & Reel (TR)includes it. It is configured with Non-Invertedas an output. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. A 0.8V~3.6Vsupply voltage is required for it to operate. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74AUP series. There should be no greater frequency than 266MHzon its output. There is 500nA quiescent consumption. There are 5 terminations,If you search by 74AUP1G79, you will find similar parts. An input voltage of 1.2Vpowers the D latch. The input capacitance of this JK flip flopis 1.5pF farads. In terms of electronic devices, this device belongs to the AUP/ULP/Vfamily of devices. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 5 pins. Its clock edge trigger type is Positive Edge. This part is included in FF/Latches. There are 1bits in its design. It reaches 3.6Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be kept above 0.8V. In order to achieve its superior flexibility, 1 circuits are used. A reliable performance of this D flip flop makes it well suited for use in TR. The output current of 4mA makes it feature maximum design flexibility.
SN74AUP1G79DCKR Features
Tape & Reel (TR) package
74AUP series
5 pins
1 Bits
SN74AUP1G79DCKR Applications
There are a lot of Texas Instruments SN74AUP1G79DCKR Flip Flops applications.
- Control circuits
- 2 – Bit synchronous counter
- ATE
- Individual Asynchronous Resets
- Automotive
- Computing
- Buffer registers
- Matched Rise and Fall
- Clock pulse
- Patented noise
