SN74AUP1G80DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Base Part Number | 74AUP1G80 |
| Function | Standard |
| Output Type | Inverted |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Circuits | 1 |
| Load Capacitance | 30pF |
| Number of Bits | 1 |
| Clock Frequency | 260MHz |
| Propagation Delay | 17.7 ns |
| Turn On Delay Time | 3.1 ns |
| Family | AUP/ULP/V |
| Current - Quiescent (Iq) | 0.9μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 6.4ns @ 3.3V, 30pF |
| Prop. Delay@Nom-Sup | 28.7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.5pF |
| Power Supply Current-Max (ICC) | 0.0009mA |
| fmax-Min | 260 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 260000000Hz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUP1G80DBVR Overview
The item is packaged in SC-74A, SOT-753cases. D flip flop is included in the Tape & Reel (TR)package. There is a Invertedoutput configured with it. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at 0.8V~3.6Vvolts. In this case, the operating temperature is -40°C~85°C TA. This D latch has the type D-Type. It is a type of FPGA belonging to the 74AUP series. There should be no greater frequency than 260MHzon its output. There is 0.9μA quiescent consumption. It has been determined that there have been 5 terminations. You can search similar parts based on 74AUP1G80. Power is provided by a 1.2V supply. This T flip flop has a capacitance of 1.5pF farads at the input. In terms of electronic devices, this device belongs to the AUP/ULP/Vfamily of devices. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 5 pins. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. The design is based on 1bits. As soon as 3.6Vis reached, Vsup reaches its maximum value. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 0.8V. To achieve this superior flexibility, 1 circuits are used. Due to its reliability, this T flip flop is well suited for TR.
SN74AUP1G80DBVR Features
Tape & Reel (TR) package
74AUP series
5 pins
1 Bits
SN74AUP1G80DBVR Applications
There are a lot of Texas Instruments SN74AUP1G80DBVR Flip Flops applications.
- Balanced Propagation Delays
- Modulo – n – counter
- Pattern generators
- Divide a clock signal by 2 or 4
- Convert a momentary switch to a toggle switch
- Differential Individual
- Safety Clamp
- High Performance Logic for test systems
- Frequency Divider circuits
- Registers
