SN74AUP1G80DBVT
| Parameters | |
|---|---|
| Supply Voltage | 1.2V |
| Base Part Number | 74AUP1G80 |
| Function | Standard |
| Output Type | Inverted |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Circuits | 1 |
| Load Capacitance | 30pF |
| Output Current | 4mA |
| Number of Bits | 1 |
| Clock Frequency | 260MHz |
| Propagation Delay | 17.7 ns |
| Turn On Delay Time | 3.1 ns |
| Family | AUP/ULP/V |
| Current - Quiescent (Iq) | 0.9μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 6.4ns @ 3.3V, 30pF |
| Prop. Delay@Nom-Sup | 28.7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.5pF |
| Power Supply Current-Max (ICC) | 0.0009mA |
| fmax-Min | 260 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 260000000Hz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
SN74AUP1G80DBVT Overview
In the form of SC-74A, SOT-753, it has been packaged. A package named Tape & Reel (TR)includes it. Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 0.8V~3.6V volts, it operates. In this case, the operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 74AUPseries of FPGAs. It should not exceed 260MHzin its output frequency. It consumes 0.9μA of quiescent 5terminations have occurred. If you search by 74AUP1G80, you will find similar parts. An input voltage of 1.2Vpowers the D latch. A JK flip flop with a 1.5pFfarad input capacitance is used here. AUP/ULP/Vis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. It is designed with 5 pins. The clock edge trigger type for this device is Positive Edge. This device has the base part number FF/Latches. 1bits are used in its design. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. A normal operating voltage (Vsup) should remain above 0.8V. Using 1 circuits, it is highly flexible. A reliable performance of this D flip flop makes it well suited for use in TR. With an output current of 4mA, it is possible to design the device in any way you want.
SN74AUP1G80DBVT Features
Tape & Reel (TR) package
74AUP series
5 pins
1 Bits
SN74AUP1G80DBVT Applications
There are a lot of Texas Instruments SN74AUP1G80DBVT Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Divide a clock signal by 2 or 4
- Count Modes
- Automotive
- Single Down Count-Control Line
- Common Clocks
- Load Control
- CMOS Process
- Memory
- Data Synchronizers
