SN74AUP1T34DSFR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Other Interface ICs |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.35mm |
| Base Part Number | 74AUP1T34 |
| Output Type | Non-Inverted |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 900mV |
| Number of Bits | 1 |
| Propagation Delay | 3.6 ns |
| Quiescent Current | 500nA |
| Supply Current-Max | 0.0052mA |
| Logic Function | Translator |
| Output Characteristics | PUSH-PULL |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -6mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 6mA |
| Supply Voltage1-Nom | 1.2V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.9V~3.6V |
| Voltage - VCCB | 0.9V~3.6V |
| Height | 400μm |
| Length | 1mm |
| Width | 1mm |
| Thickness | 350μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUP1T34DSFR Overview
In the package 6-XFDFN, it can be found.Packaged in the way of Tape & Reel (TR).In its configuration, Non-Inverted is used as the output.There is a translator type of Voltage Level for this electrical device.Mounting this electronic component follows the Surface Mount method.This electrical device has a Channel type of Unidirectional.The temperature used for operation is -40°C~85°C TA.Transmission lines can be terminated using 6 terminations to end them.A series of related parts can be derived from the base part number 74AUP1T34.This device is powered by a supply voltage of 1.2V which is applied to it.There are a number of devices in the 74AUP series.6 pins are used in its design.There are 1 bits in this electronic part.There is a maximum voltage of 3.6V supported.900mV is its minimum supply voltage.In the VCCA, the supply rail is set to 0.9V~3.6V.0.9V~3.6V is the supply rail configuration on the VCCB.Using the method of Surface Mount, this electronic component is mounted.1 channels are available.Level translators belongs to the group of Other Interface ICs.Level translators consumes 500nA of quiescent current wLevel translatorshout being affected by external factors.
SN74AUP1T34DSFR Features
6-XFDFN package
74AUP series
6 pins
SN74AUP1T34DSFR Applications
There are a lot of Texas Instruments SN74AUP1T34DSFR voltage translators & level shifters applications.
- One Fabrication Site
- Telematics
- Tablet PCs
- Routers (Telecom Switching Equipment)
- Smartphone
- Extended Product Life Cycle
- Wearable Health and Fitness Devices
- Handset
- Advanced Driver Assistance System (ADAS)
- Notebook
