SN74AUP1T58DSFR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Feature | Configurable Gate Logic Functions |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Interface ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | 74AUP1T58 |
| Pin Count | 6 |
| Output Type | Single-Ended |
| Number of Channels | 3 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Nominal Supply Current | 900nA |
| Number of Bits | 1 |
| Propagation Delay | 10.8 ns |
| Quiescent Current | 500nA |
| Turn On Delay Time | 10 ns |
| Logic Function | Translator |
| Output Characteristics | PUSH-PULL |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -4mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 4mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.8V~2.7V |
| Voltage - VCCB | 2.3V~3.6V |
| Height | 400μm |
| Length | 1mm |
| Width | 1mm |
| Thickness | 350μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUP1T58DSFR Overview
Level translators is embedded in the 6-XFDFN package.Level translators is packaged in the way of Tape & Reel (TR).In this configuration, the output is set to Single-Ended.Level translators is the Voltage Level type of translator that is used in this electrical device.Mounting this electronic component follows the Surface Mount method.Unidirectional is the type of channel for this electrical device.Level translators is -40°C~85°C TA at the operating temperature.The circuit's superior flexibility is achieved through the use of 1 circuits.To end a transmission line, there are 6 types of termination that can be used.A base part number 74AUP1T58 indicates the related parts.In order for it to operate, it needs to be powered by a voltage of 2.5V.There are 6 pins on it.There is one device in the 74AUP series, and it belongs to that series.6 pins are used in its design.This electronic part is designed with 1 Bits.3.6V is the maximum voltage it supports.A minimal voltage of 2.3V is needed to operate it.The VCCA supply rail is configured from 1.8V~2.7V.VCCB is configured with a supply rail that starts at 2.3V~3.6V.Using the method of Surface Mount, this electronic component is mounted.There are 3 channels.As part of Other Interface ICs, it belongs.Without external influences, it consumes 500nA of quiescent current.Operating with Configurable Gate Logic Functions is possible.
SN74AUP1T58DSFR Features
6-XFDFN package
1 circuits
6 pin count
74AUP series
6 pins
SN74AUP1T58DSFR Applications
There are a lot of Texas Instruments SN74AUP1T58DSFR voltage translators & level shifters applications.
- General purpose I/O level shifting
- Industrial Equipment
- Enterprise and communications
- Monitors
- Telematics
- TVs
- Motor Drives
- Products With Many I
- Industrial equipment
- UART
