SN74AUP1T98YFPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e1 |
| Feature | Configurable Gate Logic Functions |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Other Interface ICs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AUP1T98 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Single-Ended |
| Number of Channels | 3 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Nominal Supply Current | 900nA |
| Number of Bits | 1 |
| Propagation Delay | 4.7 ns |
| Quiescent Current | 500nA |
| Turn On Delay Time | 10.8 ns |
| Logic Function | Translator |
| Output Characteristics | PUSH-PULL |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -4mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 4mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.8V~2.7V |
| Voltage - VCCB | 2.3V~3.6V |
| Height | 500μm |
| Length | 1mm |
| Width | 1.4mm |
| Thickness | 500μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUP1T98YFPR Overview
Embedded in the 6-XFBGA, DSBGA package, it is available for you to use.Packaged in the way of Tape & Reel (TR).Level translators is configured wlevel translatorsh an output of Single-Ended.The translator type of this electrical device is Voltage Level.Surface Mount is the method used for mounting this electronic part.In this electrical device, the Channel type is Unidirectional.Level translators operates at -40°C~85°C TA.Flexible 1 circuits enable it to achieve high performance.0 terminations are used to end transmission lines.Based on this base part number 74AUP1T98, its related parts can be identified.The supply voltage of this device is 2.5V, and it is powered by it.There are 6 pins on it.Level translators is a type of FPGA belonging to the 74AUP series.The 6 pins are designed into it.Electronic parts with 1 bits are designed for this application.3.6V is the maximum voltage it supports.800mV is its minimum supply voltage.VCCA is configured with a supply rail that starts at 1.8V~2.7V.From 2.3V~3.6V, the supply rail of the VCCB is configured.With the Surface Mount method, it is mounted.3 is the number of channels.This part is included in Other Interface ICs.Aquiescent current is consumed by 500nA without being affected by external forces.Operating with Configurable Gate Logic Functions is possible.
SN74AUP1T98YFPR Features
6-XFBGA, DSBGA package
1 circuits
6 pin count
74AUP series
6 pins
SN74AUP1T98YFPR Applications
There are a lot of Texas Instruments SN74AUP1T98YFPR voltage translators & level shifters applications.
- Public Signage
- Eliminate slow or noisy input signals
- Motor Drives
- Extended Product Life Cycle
- Extended Product-Change Notification
- ADAS Fusion
- MDIO
- TVs
- Enterprise and communications
- Tablet
