SN74AUP2G80DCUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AUP2G80 |
| Function | Standard |
| Output Type | Inverted |
| Polarity | Inverting, Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Circuits | 2 |
| Load Capacitance | 30pF |
| Output Current | 4mA |
| Clock Frequency | 257MHz |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 3.1 ns |
| Family | AUP/ULP/V |
| Current - Quiescent (Iq) | 500nA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 6.4ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.5pF |
| Power Supply Current-Max (ICC) | 0.0009mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUP2G80DCUR Overview
8-VFSOP (0.091, 2.30mm Width)is the way it is packaged. It is contained within the Tape & Reel (TR)package. T flip flop uses Invertedas the output. This trigger uses the value Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates at a voltage of 0.8V~3.6V. A temperature of -40°C~85°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74AUPseries contain this type of chip. There should be no greater frequency than 257MHzon its output. As a result, it consumes 500nA quiescent current. It has been determined that there have been 8 terminations. The 74AUP2G80 family contains it. Power is supplied from a voltage of 1.2V volts. This JK flip flop has a 1.5pFfarad input capacitance. Electronic devices of this type belong to the AUP/ULP/Vfamily. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 8. In this device, the clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. It reaches 3.6Vwhen the supply voltage is maximal (Vsup). The superior flexibility of this product is achieved by using 2 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TR. Featuring the maximum design flexibility, it has an output current of 4mA .
SN74AUP2G80DCUR Features
Tape & Reel (TR) package
74AUP series
8 pins
SN74AUP2G80DCUR Applications
There are a lot of Texas Instruments SN74AUP2G80DCUR Flip Flops applications.
- Computers
- 2 – Bit synchronous counter
- Bus hold
- Load Control
- Individual Asynchronous Resets
- Consumer
- Supports Live Insertion
- Asynchronous counter
- Automotive
- Guaranteed simultaneous switching noise level
