SN74AVC16722DGGR
| Parameters | |
|---|---|
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 30pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Clock Frequency | 175MHz |
| Propagation Delay | 5.4 ns |
| Turn On Delay Time | 7.7 ns |
| Family | AVC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 22 |
| Max Propagation Delay @ V, Max CL | 2.6ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 4 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 17mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 64 |
| Weight | 262.601633mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.4V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AVC16722 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
SN74AVC16722DGGR Overview
The package is in the form of 64-TFSOP (0.240, 6.10mm Width). A package named Cut Tape (CT)includes it. The output it is configured with uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis in the way of this electric part. A voltage of 1.4V~3.6Vis required for its operation. The operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74AVCseries contain this type of chip. A frequency of 175MHzshould be the maximum output frequency. In total, it contains 1 elements. T flip flop consumes 40μA quiescent energy. There are 64 terminations,It is a member of the 74AVC16722 family. It is powered by a voltage of 1.5V . A JK flip flop with a 4pFfarad input capacitance is used here. Devices in the AVCfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. With its 64pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. There is a FF/Latchesbase part number assigned to the RS flip flops. As soon as 3.6Vis reached, Vsup reaches its maximum value. In view of its reliability, this D flip flop is a good fit for TR. It operates from 3.3V power supplies. The flip flop has 2ports embedded within it. Its output current of 12mAallows for maximum design flexibility. There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
SN74AVC16722DGGR Features
Cut Tape (CT) package
74AVC series
64 pins
3.3V power supplies
SN74AVC16722DGGR Applications
There are a lot of Texas Instruments SN74AVC16722DGGR Flip Flops applications.
- EMI reduction circuitry
- Modulo – n – counter
- Buffer registers
- Registers
- Storage Registers
- Computers
- Frequency division
- Event Detectors
- Digital electronics systems
- ESD protection
