SN74AVC16835DGGR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 249.986095mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AVC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.4V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AVC16835 |
| Pin Count | 56 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Channels | 18 |
| Number of Circuits | 18-Bit |
| Load Capacitance | 30pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 18 |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 10.3 ns |
| Family | AVC |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 12mA 12mA |
| Logic Type | Universal Bus Driver |
| Control Type | ENABLE LOW |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AVC16835DGGR Overview
The package 56-TFSOP (0.240, 6.10mm Width) contains this file embedded in it. Cut Tape (CT) is how it's packaged. The superior flexibility of 18-Bit circuits is achieved through their use. As far as the logic type of this electrical device is concerned, it is Universal Bus Driver. In this case, the electronic part is mounted in the direction of Surface Mount. Over -40°C~85°C, the operating temperature should be higher. As a result of 12mA 12mA's high and low output current capability, it offers the maximum amount of design flexibility. As part of the 74AVC series, it is a type of FPGA. Using 1.4V~3.6V as a supply voltage, it operates. 74AVC16835 family is the family in which it belongs. It can be said that there is a technique of terminating transmission lines that uses a device that matches the characteristics of the line impedance, called 56 terminations. As a rule of thumb, the supply voltage should be maintained above 1.5V to ensure normal operation. 56 pins are present in the device. 18 Bits were used in the design of this electronic part. It is possible to terminate a transmission line with a device that matches the line's characteristic impedance, known as 2 terminations. It is mounted in the way of Surface Mount so that this electronic part can be seen. It has 56 pins. The device belongs to the AVC family of electronic devices. It reaches 3.6V when the maximum supply voltage (Vsup) is reached. Power comes from a 3.3V source. There are 1 elements in it. Based on its reliable performance, this device is well suited for TAPE AND REEL. In terms of design flexibility, 12mA features a high output current. In Bus Driver/Transceiver, there is this part. We are seeing an increase in the number of channels, which is good/bad: 18.
SN74AVC16835DGGR Features
56-TFSOP (0.240, 6.10mm Width) package
74AVC series
74AVC16835 family
56 pin count
56 pins
3.3V power supplies
1 elements
SN74AVC16835DGGR Applications
There are a lot of Texas Instruments SN74AVC16835DGGR Universal Bus Functions applications.
- Data transfer
- Analog ICs
- Communication
- Solar energy generation
- Projector
- Pocket PC
- Range hood
- Fax machine
- Digital Electronics
- Overvoltage and undervoltage protection
