SN74AVC1T45DBVRE4
| Parameters | |
|---|---|
| Quiescent Current | 20μA |
| Turn On Delay Time | 5.6 ns |
| Family | AVC |
| Logic Function | Translator |
| Data Rate | 500Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~3.6V |
| Voltage - VCCB | 1.2V~3.6V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 6.492041mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TWO SEPARATE CONFIGURABLE POWER SUPPLY RAILS FOR PORT A AND PORT B |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | 74AVC1T45 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 1 |
| Propagation Delay | 2.8 ns |
SN74AVC1T45DBVRE4 Overview
In the SOT-23-6 package, it is embedded.Packaged as Tape & Reel (TR).This output is configured with Tri-State, Non-Inverted.Translator type Voltage Level is assigned to this electrical device.A Surface Mount mounting method has been used for this electronic part.Level translators has the Channel type Bidirectional.During operation, the temperature is set to -40°C~85°C TA.Usually, when a transmission line is terminated, there are 6 termination points used.A series of related parts can be derived from the base part number 74AVC1T45.A supply voltage of 1.5V is used to power the device.The pin count of this device is 6.In terms of its design, it is a member of the 74AVC series.With 6 pins, it is designed.Electronic parts with 1 bits are designed for this application.The maximum supply voltage is 3.6V.A voltage of 1.2V is the minimum supply voltage required for it to operate.Level translators is configured from 1.2V~3.6V for the VCCA supply rail.In the VCCB, the supply rail is set to 1.2V~3.6V.Surface Mount is used for mounting.Level translators is 1 channels.Level translators belongs to the group of Bus Driver/Transceivers.There is BUS TRANSCEIVER logic IC in it.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.Electronic devices like this belong to the family AVC.Without external influences, it consumes 20μA of quiescent current.Considering its reliability, this device is appropriate for TR.Because it features a 12mA output current, maximum design flexibility can be achieved.There are also characteristics of TWO SEPARATE CONFIGURABLE POWER SUPPLY RAILS FOR PORT A AND PORT B associated with it.There are 2 outputs configured on this device.
SN74AVC1T45DBVRE4 Features
SOT-23-6 package
6 pin count
74AVC series
6 pins
2 outputs
SN74AVC1T45DBVRE4 Applications
There are a lot of Texas Instruments SN74AVC1T45DBVRE4 voltage translators & level shifters applications.
- GPIO
- Industrial
- Enterprise
- I2C / SMBus
- UART
- Extended Product Life Cycle
- Personal computers
- Printers and Other Peripherals
- General purpose I/O level shifting
- Electronic Points of Sale
