SN74AVC2T244DQER
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.35mm |
| Base Part Number | 74AVC2T244 |
| Pin Count | 8 |
| Output Type | Tri-State, Non-Inverted |
| Power Supplies | 3.3V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 900mV |
| Nominal Supply Current | 3.6μA |
| Number of Bits | 2 |
| Propagation Delay | 3.5 ns |
| Quiescent Current | 6μA |
| Turn On Delay Time | 23 ns |
| Logic Function | Translator |
| Data Rate | 380Mbps |
| Output Characteristics | 3-STATE |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -24mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.9V~3.6V |
| Voltage - VCCB | 0.9V~3.6V |
| Height | 400μm |
| Length | 1.4mm |
| Width | 1mm |
| Thickness | 370μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Other Interface ICs |
| Technology | CMOS |
SN74AVC2T244DQER Overview
A package called 8-XFDFN contains it.A package of Cut Tape (CT) has been used.In its configuration, Tri-State, Non-Inverted is used as the output.Level translators has the translator type Voltage Level.Level translators is mounted according to the Surface Mount method.A Unidirectional channel type is associated with this electrical device.A temperature of -40°C~85°C TA is used for operation.1 circuits are used to provide this superior level of flexibility.Transmission lines can be terminated using 8 terminations to end them.Based on this base part number 74AVC2T244, its related parts can be identified.Level translators is powered from a supply voltage of 3.3V.With 8 pins, it is equipped with a minimal number of connections.This device belongs to the 74AVC series.With 8 pins, it is designed.The design of this electronic part is based on 2 bits.3.6V is the maximum voltage it supports.There is a minimum supply voltage of 900mV for it.From 0.9V~3.6V, the supply rail of the VCCA is configured.A VCCB supply rail is configured as 0.9V~3.6V.This mount is done using the method of Surface Mount.There are a total of 2 channels.As part of Other Interface ICs, it belongs.The quiescent current consumed by it is 6μA because it is unaffected by external factors.A 3.3V power supply powers it.
SN74AVC2T244DQER Features
8-XFDFN package
1 circuits
8 pin count
74AVC series
8 pins
3.3V power supplies
SN74AVC2T244DQER Applications
There are a lot of Texas Instruments SN74AVC2T244DQER voltage translators & level shifters applications.
- Routers (Telecom Switching Equipment)
- Routers (routing equipment)
- Industrial Equipment
- Extended Product-Change Notification
- Personal computing
- Temperature Ranges (1)
- LCD Panels Using GIP / GOA / ASG Technology
- I2C
- One Assembly and Test Site
- Handset
