SN74AVC2T45DCTTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 8 |
| Weight | 23.388357mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO SEPARATE CONFIGURABLE POWER-SUPPLY RAILS FOR PORT A AND B |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 2.4 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5.4 ns |
| Family | AVC |
| Logic Function | Translator |
| Data Rate | 500 Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AVC2T45DCTTG4 Overview
Embedded in the SSOP package, it is available for you to use.Tape and Reel is the packaging method.Usually, when a transmission line is terminated, there are 8 termination points used.Power comes from a voltage of 1.5V.Level translators has 8 pins.The pin configuration of the device is 8.2 Bits are used in the design of this electronic part.3.6V is the maximum supply voltage it can handle.1.2V is its minimum supply voltage.Mounting this electronic component is done using the Surface Mount method.As for the logic IC it uses, it is a BUS TRANSCEIVER.2 terminations are the practice of terminating a transmission line with a device matching its characteristic impedance.AVC is the family of this electronic device.In the absence of external influences, it consumes 10μA of quiescent current.TWO SEPARATE CONFIGURABLE POWER-SUPPLY RAILS FOR PORT A AND B are also a characteristics of it.Temperatures higher than -40°C should be used for operation.There should be a temperature below 85°C at which the system is operating.As far as this device is concerned, it contains 1 elements.
SN74AVC2T45DCTTG4 Features
SSOP package
8 pin count
8 pins
1 elements
SN74AVC2T45DCTTG4 Applications
There are a lot of Texas Instruments SN74AVC2T45DCTTG4 voltage translators & level shifters applications.
- Notebook
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- LCD Panels Using GIP / GOA / ASG Technology
- UART
- Personal Electronics
- SDIO
- Enterprise
- Test Site
- Driving indicator LEDs or buzzers
- SMBus
