Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-VFSOP (0.091, 2.30mm Width) |
Number of Pins |
8 |
Weight |
9.610488mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Series |
74AVC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
TWO SEPARATE CONFIGURABLE POWER-SUPPLY RAILS FOR PORT A AND B |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
1.5V |
Terminal Pitch |
0.5mm |
Base Part Number |
74AVC2T45 |
Pin Count |
8 |
Output Type |
Tri-State, Non-Inverted |
Polarity |
Non-Inverting |
Number of Channels |
2 |
Number of Circuits |
1 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.2V |
Number of Ports |
2 |
Number of Bits |
2 |
Propagation Delay |
2.4 ns |
Quiescent Current |
10μA |
Turn On Delay Time |
5.4 ns |
Family |
AVC |
Logic Function |
Transceiver, Translator |
Data Rate |
500Mbps |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS TRANSCEIVER |
High Level Output Current |
-12mA |
Channel Type |
Bidirectional |
Low Level Output Current |
12mA |
Control Type |
COMMON CONTROL |
Translator Type |
Voltage Level |
Voltage - VCCA |
1.2V~3.6V |
Voltage - VCCB |
1.2V~3.6V |
Height |
900μm |
Length |
2.3mm |
Width |
2mm |
Thickness |
850μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AVC2T45DCURG4 Overview
Embedded in the 8-VFSOP (0.091, 2.30mm Width) package, it is available for you to use.Tape & Reel (TR) is the way it is packaged.The output it is configured with uses Tri-State, Non-Inverted.Level translators is the Voltage Level type of translator that is used in this electrical device.Mounting this electronic component follows the Surface Mount method.Level translators has the Channel type Bidirectional.The operating temperature is -40°C~85°C TA.1 circuits are used to achieve its superior flexibility.Usually, when a transmission line is terminated, there are 8 termination points used.A base part number 74AVC2T45 indicates the related parts.Power comes from a voltage of 1.5V.Pin count is 8.The device is part of the 74AVC series.The pin configuration of the device is 8.The design of this electronic part is based on 2 bits.Supports a voltage of 3.6V as its maximum supply voltage.This device requires a minimum voltage of 1.2V.Level translators is configured from 1.2V~3.6V for the VCCA supply rail.In the VCCB supply rail, 1.2V~3.6V is configured.Surface Mount is used for mounting.2 channels are available.Level translators is part of Bus Driver/Transceivers.A BUS TRANSCEIVER logic IC is used.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.Level translators is a member of the AVC family of electronic devices.Without external influence, it consumes 10μA of quiescent current.This device has been rated to be suitable for TR based upon the reliability of its performance.The TWO SEPARATE CONFIGURABLE POWER-SUPPLY RAILS FOR PORT A AND B characteristics are also present.
SN74AVC2T45DCURG4 Features
8-VFSOP (0.091, 2.30mm Width) package
1 circuits
8 pin count
74AVC series
8 pins
SN74AVC2T45DCURG4 Applications
There are a lot of Texas Instruments SN74AVC2T45DCURG4 voltage translators & level shifters applications.
- Electronic Points of Sale
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- One Assembly and Test Site
- Signaling Level Conversion for Clock or Data
- Automotive
- I2C
- Enterprise and communications
- Extended Product-Change Notification
- Controlled Baseline
- Printers and Other Peripherals