SN74AVC2T45YEPR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-XFBGA, DSBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AVC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Additional Feature | TWO SEPARATE CONFIGURABLE POWER-SUPPLY RAILS FOR PORT A AND B |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AVC2T45 |
| Pin Count | 8 |
| JESD-30 Code | R-PBGA-B8 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 2.4 ns |
| Family | AVC |
| Logic Function | Translator |
| Data Rate | 500Mbps |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.006 A |
| Channel Type | Bidirectional |
| Control Type | COMMON CONTROL |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~3.6V |
| Voltage - VCCB | 1.2V~3.6V |
| Height Seated (Max) | 0.5mm |
| Width | 0.9mm |
| RoHS Status | ROHS3 Compliant |
SN74AVC2T45YEPR Overview
A package called 8-XFBGA, DSBGA contains it.Level translators is packaged in the way of Tape & Reel (TR).This output uses Tri-State, Non-Inverted.The translator type of this electrical device is Voltage Level.Surface Mount is the way in which this electronic part is mounted.The Channel type of this electrical device is Bidirectional.Operation is performed at -40°C~85°C TA.The circuit's superior flexibility is achieved through the use of 1 circuits.Usually, when a transmission line is terminated, there are 8 termination points used.Parts related to a base part number 74AVC2T45 are designated by the same number.Power comes from a voltage of 1.5V.Level translators has 8 pins.The device is a member of the 74AVC series.An electronic part with 2 bits is designed.In the VCCA supply rail, 1.2V~3.6V is configured.In the VCCB supply rail, 1.2V~3.6V is configured.There are a total of 2 channels.Level translators belongs to the group of Bus Driver/Transceivers.As for the logic IC it uses, it is a BUS TRANSCEIVER.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.Level translators is part of the family of electronic devices called AVC.TAPE AND REEL is well suited to this device because of its reliability.Also, TWO SEPARATE CONFIGURABLE POWER-SUPPLY RAILS FOR PORT A AND B characterize it.
SN74AVC2T45YEPR Features
8-XFBGA, DSBGA package
1 circuits
8 pin count
74AVC series
SN74AVC2T45YEPR Applications
There are a lot of Texas Instruments SN74AVC2T45YEPR voltage translators & level shifters applications.
- Debouncing a Mechanical Switch
- One Assembly and Test Site
- Power-sensitive applications
- I2C / SMBus
- Routers (Telecom Switching Equipment)
- Servers
- Products With Many I
- Extended Product Life Cycle
- Monitors
- GPIO
