SN74AVC4T234ZSUR
| Parameters | |
|---|---|
| Turn On Delay Time | 3.6 ns |
| Family | AVC |
| Logic Function | Inverting, Transceiver, Translator |
| Data Rate | 380Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Prop. Delay@Nom-Sup | 5 ns |
| High Level Output Current | -12mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 12mA |
| Ambient Temperature Range High | 85°C |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.9V~3.6V |
| Voltage - VCCB | 0.9V~3.6V |
| Height | 450μm |
| Length | 2mm |
| Width | 1.4mm |
| Thickness | 365μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 11-XFBGA, CSPBGA |
| Number of Pins | 11 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AVC |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 11 |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AVC4T234 |
| Pin Count | 11 |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 900mV |
| Number of Ports | 2 |
| Nominal Supply Current | 16μA |
| Number of Bits | 1 |
| Propagation Delay | 3.6 ns |
| Quiescent Current | 16μA |
SN74AVC4T234ZSUR Overview
In the package 11-XFBGA, CSPBGA, it can be found.A Cut Tape (CT) package is used to package it.Level translators is configured wlevel translatorsh an output of Non-Inverted.Translator type Voltage Level is assigned to this electrical device.Mounting this electronic component follows the Surface Mount method.Unidirectional is the type of channel for this electrical device.A temperature of -40°C~85°C TA is used for operation.1 circuits are used to provide this superior level of flexibility.Usually, when a transmission line is terminated, there are 11 termination points used.There is a base part number 74AVC4T234 that refers to the related parts.Power comes from a voltage of 1.1V.Level translators has 11 pins.Level translators is a type of FPGA belonging to the 74AVC series.Designed with 11 pins, it is compatible with a wide range of devices.Level translators is designed wLevel translatorsh 1 bLevel translatorss.There is a maximum voltage of 3.6V supported.This device requires a minimum voltage of 900mV.From 0.9V~3.6V, the supply rail of the VCCA is configured.In the VCCB supply rail, 0.9V~3.6V is configured.Using the method of Surface Mount, this electronic component is mounted.4 is the number of channels available in the system.In Bus Driver/Transceivers, you will find this part.There is a logic IC BUS DRIVER used in the system.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.In terms of electronic devices, this one is in the AVC family.Aquiescent current is consumed by 16μA without being affected by external forces.This device has been rated to be suitable for TR based upon the reliability of its performance.
SN74AVC4T234ZSUR Features
11-XFBGA, CSPBGA package
1 circuits
11 pin count
74AVC series
11 pins
SN74AVC4T234ZSUR Applications
There are a lot of Texas Instruments SN74AVC4T234ZSUR voltage translators & level shifters applications.
- Monitors
- I2C / SMBus
- Infotainment Head Unit
- Available in Military (-55°C to 125°C)
- Wearable Health and Fitness Devices
- Enterprise
- One Fabrication Site
- Electronic Points of Sale
- General purpose I/O level shifting
- Tablet PCs
