SN74AVC4T245DTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO SEPARATE CONFIGURABLE POWER-SUPPLY FOR PORT A AND PORT B |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Pin Count | 16 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 1.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.2V |
| Load Capacitance | 15pF |
| Number of Ports | 2 |
| Current - Output | 12mA |
| Number of Bits | 4 |
| Propagation Delay | 2.9 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 10.3 ns |
| Family | AVC |
| Logic Function | Translator |
| Data Rate | 380 Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 6.3 ns |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Count Direction | BIDIRECTIONAL |
| Translation | 1.5/3.3V&1.5/3.3V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AVC4T245DTE4 Overview
SOIC contains it.A Tape and Reel package is used to package it.Usually, when a transmission line is terminated, there are 16 termination points used.This device is powered by a supply voltage of 1.5V which is applied to it.Level translators has 16 pins.Designed with 16 pins, it is compatible with a wide range of devices.Electronic parts with 4 bits are designed for this application.3.6V is the maximum voltage it supports.The minimal supply voltage is 1.2V.Using the method of Surface Mount, this electronic component is mounted.As part of Bus Driver/Transceivers, this part is included.In this case, the logic IC is BUS TRANSCEIVER.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.Despite the fact that it is an electronic device, it belongs to the AVC family.Without external influence, it consumes 80μA of quiescent current.A 1.5/3.3V power supply is required for it to operate.In addition to that, it is also characterized by a TWO SEPARATE CONFIGURABLE POWER-SUPPLY FOR PORT A AND PORT B.-40°C is the minimum operating temperature.Ideally, the temperature should not be higher than 85°C.This device has a total of 2 elements.Due to the 12mA output current, it provides maximum design flexibility.
SN74AVC4T245DTE4 Features
SOIC package
16 pin count
16 pins
1.5/3.3V power supplies
2 elements
SN74AVC4T245DTE4 Applications
There are a lot of Texas Instruments SN74AVC4T245DTE4 voltage translators & level shifters applications.
- Telecommunications
- Driving Indicator LEDs or Buzzers
- Monitors
- Extended Product-Change Notification
- Debouncing a mechanical switch
- Printers and Other Peripherals
- TVs
- PMBus
- Enterprise
- Tablet PCs
