SN74AVC4T245PWE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO SEPARATE CONFIGURABLE POWER-SUPPLY FOR PORT A AND PORT B |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Pin Count | 16 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 1.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.2V |
| Load Capacitance | 15pF |
| Number of Ports | 2 |
| Current - Output | 12mA |
| Number of Bits | 4 |
| Propagation Delay | 2.9 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 10.3 ns |
| Family | AVC |
| Logic Function | Translator |
| Data Rate | 380 Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Prop. Delay@Nom-Sup | 6.3 ns |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Count Direction | BIDIRECTIONAL |
| Translation | 1.5/3.3V&1.5/3.3V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AVC4T245PWE4 Overview
The TSSOP package contains it.A transmission line can be terminated with 16 terminations.Level translators is powered by a 1.5V supply.The pin count of this device is 16.There are 16 pins on it.The design of this electronic part is based on 4 bits.Supports a voltage of 3.6V as its maximum supply voltage.The minimal supply voltage is 1.2V.This mount is done using the method of Surface Mount.In Bus Driver/Transceiver, this part is included.Level translators uses the logic IC BUS TRANSCEIVER.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.In terms of electronic devices, this one is in the AVC family.Level translators consumes 80μA of quiescent current wLevel translatorshout being affected by outside factors.1.5/3.3V power supplies are required to run it.This device is well suited for TUBE based on its reliable performance.In addition, it is characterized by TWO SEPARATE CONFIGURABLE POWER-SUPPLY FOR PORT A AND PORT B.A temperature of at least [0°C] should be used for the operation.Ideally, the temperature should not be higher than 85°C.2 elements are present in it.Featuring a 12mA output current, its design flexibility is maximized.
SN74AVC4T245PWE4 Features
TSSOP package
16 pin count
16 pins
1.5/3.3V power supplies
2 elements
SN74AVC4T245PWE4 Applications
There are a lot of Texas Instruments SN74AVC4T245PWE4 voltage translators & level shifters applications.
- Automotive infotainment
- Monitors
- Telematics
- Servers
- General purpose I/O level shifting
- Extended Product-Change Notification
- Eliminate slow or noisy input signals
- Controlled Baseline
- Enterprise and communications
- Personal Electronics
