SN74AVC8T245PWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AVC8T245 |
| Pin Count | 24 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.7 ns |
| Quiescent Current | 15μA |
| Turn On Delay Time | 2.5 ns |
| Family | AVC |
| Logic Function | Transceiver, Translator |
| Data Rate | 320Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Prop. Delay@Nom-Sup | 5.4 ns |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 0.025mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~3.6V |
| Voltage - VCCB | 1.2V~3.6V |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AVC8T245PWG4 Overview
Level translators is integrated into the 24-TSSOP (0.173, 4.40mm Width) package.Tube is the packaging method.In this configuration, the output is set to Tri-State, Non-Inverted.Translator type Voltage Level is assigned to this electrical device.The electronic part is mounted using the Surface Mount method.Bidirectional is the type of channel for this electrical device.During operation, the temperature is set to -40°C~85°C TA.The superior flexibility of the system is achieved through its use of 1 circuits.When it comes to terminating a transmission line, there are 24 terminations.The base part number 74AVC8T245 can be used to find its related parts.The supply voltage of this device is 1.5V, and it is powered by it.24 pins are present on this board.This device belongs to the 74AVC series.With 24 pins, it is designed.There are 8 bits in this electronic part, which means it is designed in such a way.Voltages above 3.6V are supported.A minimal voltage of 1.2V is needed to operate it.1.2V~3.6V is the configuration of the VCCA supply rail.1.2V~3.6V is the supply rail configuration on the VCCB.Using the method of Surface Mount, this electronic component is mounted.There are a total of 8 channels.Level translators is part of Bus Driver/Transceivers.A BUS TRANSCEIVER logic IC is used.2 terminations are the practice of terminating a transmission line with a device matching its characteristic impedance.Level translators is part of the family of electronic devices called AVC.Level translators consumes 15μA of quiescent current wLevel translatorshout being affected by outside factors.
SN74AVC8T245PWG4 Features
24-TSSOP (0.173, 4.40mm Width) package
1 circuits
24 pin count
74AVC series
24 pins
SN74AVC8T245PWG4 Applications
There are a lot of Texas Instruments SN74AVC8T245PWG4 voltage translators & level shifters applications.
- Driving Indicator LEDs or Buzzers
- Routers (routing equipment)
- Debouncing a mechanical switch
- Desktop PC
- Extended Product-Change Notification
- One Fabrication Site
- One Assembly
- Extended Product Life Cycle
- Available in Military (–55°C/125°C) Temperature Range
- Monitors
