Parameters |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
1.5V |
Terminal Pitch |
0.5mm |
Base Part Number |
74AVCA164245 |
Pin Count |
48 |
Output Type |
Tri-State, Non-Inverted |
Polarity |
Non-Inverting |
Power Supplies |
1.5/3.3V |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.4V |
Load Capacitance |
15pF |
Number of Ports |
2 |
Output Current |
12mA |
Number of Bits |
16 |
Propagation Delay |
3.1 ns |
Turn On Delay Time |
10.8 ns |
Family |
AVC |
Logic Function |
Transceiver, Translator |
Data Rate |
400 Mbps |
Number of Inputs |
2 |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS TRANSCEIVER |
High Level Output Current |
-12mA |
Channel Type |
Bidirectional |
Low Level Output Current |
12mA |
Control Type |
COMMON CONTROL |
Translation |
1.5/3.3V&1.5/3.3V |
Translator Type |
Voltage Level |
Voltage - VCCA |
1.4V~3.6V |
Voltage - VCCB |
1.4V~3.6V |
Channels per Circuit |
8 |
Height |
1.2mm |
Length |
12.5mm |
Width |
6.1mm |
Thickness |
1.15mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
48 |
Weight |
223.195796mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Series |
74AVCA |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Additional Feature |
TWO SEPARATE CONFIGURABLE POWER SUPPLY FOR PORT A AND PORT B |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
SN74AVCA164245GR Overview
In the 48-TFSOP (0.240, 6.10mm Width) package, it is embedded.Packaged in the way of Tape & Reel (TR).Level translators uses Tri-State, Non-Inverted as the output.Translator type Voltage Level is assigned to this electrical device.The electronic part is mounted in a way that corresponds to Surface Mount.In this electrical device, the Channel type is Bidirectional.The operating temperature is -40°C~85°C TA.Usually, when a transmission line is terminated, there are 48 termination points used.The base part number 74AVCA164245 can be used to find its related parts.Power comes from a voltage of 1.5V.With 48 pins, it is equipped with a minimal number of connections.In terms of its design, it is a member of the 74AVCA series.The board has 48 pins.There are 16 bits in this electronic part.Supports a voltage of 3.6V as its maximum supply voltage.This device requires a minimum voltage of 1.4V.In the VCCA supply rail, 1.4V~3.6V is configured.A VCCB supply rail is configured as 1.4V~3.6V.This mount is done using the method of Surface Mount.In Bus Driver/Transceivers, you will find this part.As for the logic IC it uses, it is a BUS TRANSCEIVER.2 terminations are possible, which each match the transmission line's characteristic impedance.Level translators is part of the family of electronic devices called AVC.In order for Level translators to operate, level translators needs a power supply of 1.5/3.3V.The device's reliable performance makes it a good choice for TR.Due to the 12mA output current, it provides maximum design flexibility.In addition, it is characterized by TWO SEPARATE CONFIGURABLE POWER SUPPLY FOR PORT A AND PORT B.
SN74AVCA164245GR Features
48-TFSOP (0.240, 6.10mm Width) package
48 pin count
74AVCA series
48 pins
1.5/3.3V power supplies
SN74AVCA164245GR Applications
There are a lot of Texas Instruments SN74AVCA164245GR voltage translators & level shifters applications.
- Notebook
- Controlled Baseline
- General purpose I/O level shifting
- One Fabrication Site
- Extended Product-Change Notification
- One Assembly and Test Site
- PMBus
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Debouncing a mechanical switch
- Telematics