SN74AVCA164245KR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 58.796911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AVCA |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | TWO SEPARATE CONFIGURABLE POWER SUPPLY FOR PORT A AND PORT B |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AVCA164245 |
| Pin Count | 56 |
| Number of Outputs | 16 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Power Supplies | 1.5/3.3V |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.4V |
| Load Capacitance | 15pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 10.8 ns |
| Turn On Delay Time | 2.4 ns |
| Family | AVC |
| Logic Function | Transceiver, Translator |
| Data Rate | 400 Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.004 A |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Translation | 1.5/3.3V&1.5/3.3V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.4V~3.6V |
| Voltage - VCCB | 1.4V~3.6V |
| Channels per Circuit | 8 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AVCA164245KR Overview
A package called 56-VFBGA contains it.Packaged in the way of Cut Tape (CT).Level translators uses Tri-State, Non-Inverted as level translatorss output configuration.The translator type of this electrical device is Voltage Level.Surface Mount is the method used for mounting this electronic part.In this electrical device, the Channel type is Bidirectional.Operation is performed at -40°C~85°C TA.To achieve its exceptional flexibility, it relies on 2 circuits.Transmission lines can be terminated using 56 terminations to end them.A base part number 74AVCA164245 indicates the related parts.Level translators is powered from a supply voltage of 1.5V.Pin count is 56.The device is a member of the 74AVCA series.In addition, it is designed with a pin number of 56.Electronic parts with 8 bits are designed for this application.There is a maximum voltage of 3.6V supported.The minimal supply voltage is 1.4V.There is a configuration of 1.4V~3.6V for the VCCA supply rail.A VCCB supply rail is configured as 1.4V~3.6V.Using the method of Surface Mount, this electronic component is mounted.Bus Driver/Transceivers contains this part.A BUS TRANSCEIVER logic IC is used.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.Electronic devices like this belong to the family AVC.A power supply of 1.5/3.3V is used to operate this machine.The device's reliable performance makes it a good choice for TAPE AND REEL.Its characteristics include TWO SEPARATE CONFIGURABLE POWER SUPPLY FOR PORT A AND PORT B.A configuration of 16 outputs has been set up for it.
SN74AVCA164245KR Features
56-VFBGA package
2 circuits
56 pin count
74AVCA series
56 pins
1.5/3.3V power supplies
16 outputs
SN74AVCA164245KR Applications
There are a lot of Texas Instruments SN74AVCA164245KR voltage translators & level shifters applications.
- MDIO
- Automotive infotainment
- Advanced Driver Assistance System (ADAS)
- Controlled Baseline
- GPIO
- Automotive
- Telecommunications
- Industrial equipment
- Personal computers
- Handset
