SN74AVCAH164245KR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 58.796911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AVCAH |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AVCAH164245 |
| Pin Count | 56 |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 1.5/3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.4V |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 3.1 ns |
| Turn On Delay Time | 2.7 ns |
| Family | AVC |
| Logic Function | Translator |
| Data Rate | 400 Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.004 A |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Translation | 1.5/3.3V&1.5/3.3V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.4V~3.6V |
| Voltage - VCCB | 1.4V~3.6V |
| Channels per Circuit | 8 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AVCAH164245KR Overview
In the package 56-VFBGA, it can be found.Cut Tape (CT) is the way it is packaged.Tri-State, Non-Inverted is used for the output it is configured with.Translator type Voltage Level is associated with this electrical device.The electronic part is mounted using the Surface Mount method.There is Bidirectional channel type for this electrical device.The operating temperature is -40°C~85°C TA.Usually, when a transmission line is terminated, there are 56 termination points used.Level translators is possible to determine Level translatorss related parts using the base part number 74AVCAH164245.In order for it to operate, it needs to be powered by a voltage of 1.5V.Level translators is equipped wLevel translatorsh 56 pin count.There are a number of devices in the 74AVCAH series.With 56 pins, it is designed.There are 16 bits in this electronic part.Level translators supports a maximum supply voltage of 3.6V.There is a minimum supply voltage of 1.4V for it.The VCCA supply rail is configured from 1.4V~3.6V.VCCB is configured with a supply rail that starts at 1.4V~3.6V.The mount method is Surface Mount.I would classify it as part of the group of Bus Driver/Transceivers.There is BUS TRANSCEIVER logic IC in it.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.In the world of electronics, this electronic device belongs to the family of AVC.This device runs on a 1.5/3.3V power supply.The device's reliable performance makes it a good choice for TAPE AND REEL.A total of 2 elements make up this object.
SN74AVCAH164245KR Features
56-VFBGA package
56 pin count
74AVCAH series
56 pins
1.5/3.3V power supplies
2 elements
SN74AVCAH164245KR Applications
There are a lot of Texas Instruments SN74AVCAH164245KR voltage translators & level shifters applications.
- SMBus
- ADAS Fusion
- Telecom
- Eliminate Slow or Noisy Input Signals
- TVs
- Enterprise and communications
- Monitors
- Telecommunications
- General purpose I/O level shifting
- Servers
