SN74AVCH4T245DTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO SEPARATE CONFIGURABLE POWER SUPPLY RAILS FOR PORT A AND PORT B |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Pin Count | 16 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 1.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.2V |
| Load Capacitance | 15pF |
| Number of Ports | 2 |
| Number of Bits | 4 |
| Propagation Delay | 10.3 ns |
| Turn On Delay Time | 2.9 ns |
| Family | AVC |
| Logic Function | Transceiver, Translator |
| Data Rate | 380 Mbps |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 6.3 ns |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Translation | 1.5/3.3V&1.5/3.3V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AVCH4T245DTE4 Overview
Level translators is embedded in the SOIC package.Level translators is packaged in the way of Tape and Reel.Transmission lines can be terminated using 16 terminations to end them.In order to power the device, a voltage supply of 1.5V is required.The device has a pin count of 16.The pin configuration of the device is 16.There are 4 bits in this electronic part.The maximum supply voltage is 3.6V.This device requires a minimum voltage of 1.2V.Surface Mount is used for mounting.As part of Bus Driver/Transceivers, it belongs.The logic IC it adopts is BUS TRANSCEIVER.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.Electronic devices like this belong to the family AVC.A 1.5/3.3V power supply is required for it to operate.This device has been rated to be suitable for TUBE based upon the reliability of its performance.Also, TWO SEPARATE CONFIGURABLE POWER SUPPLY RAILS FOR PORT A AND PORT B characterize it.The operating temperature should be higher than -40°C.Ideally, the temperature should not be higher than 85°C.As far as this device is concerned, it contains 2 elements.
SN74AVCH4T245DTE4 Features
SOIC package
16 pin count
16 pins
1.5/3.3V power supplies
2 elements
SN74AVCH4T245DTE4 Applications
There are a lot of Texas Instruments SN74AVCH4T245DTE4 voltage translators & level shifters applications.
- Routers (routing equipment)
- Debouncing a mechanical switch
- Desktop PC
- Automotive
- I2C / SMBus
- Signaling Level Conversion for Clock or Data
- One Assembly
- Notebook
- Industrial equipment
- Electronic Points of Sale
