SN74BCT29821DWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74BCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74BCT29821 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Clock Frequency | 125MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 7.5 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 48mA |
| Max I(ol) | 0.048 A |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5.5pF |
| Power Supply Current-Max (ICC) | 35mA |
| Number of Output Lines | 10 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74BCT29821DWRG4 Overview
In the form of 24-SOIC (0.295, 7.50mm Width), it has been packaged. The package Tape & Reel (TR)contains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 4.5V~5.5V. 0°C~70°C TAis the operating temperature. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74BCT series. A frequency of 125MHzshould be the maximum output frequency. D latch consists of 1 elements. As a result, it consumes 10mA of quiescent current without being affected by external factors. A total of 24terminations have been recorded. The 74BCT29821family includes it. An input voltage of 5Vpowers the D latch. Its input capacitance is 5.5pF farads. Electronic devices of this type belong to the BCT/FBTfamily. The electronic part is mounted in the way of Surface Mount. It is designed with 24 pins. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. It is designed with a number of bits of 10. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be above 4.5V. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. The power supply is 5V. A total of 2ports are embedded in the D flip flop. In order for the chip to function, it has 10output lines.
SN74BCT29821DWRG4 Features
Tape & Reel (TR) package
74BCT series
24 pins
10 Bits
5V power supplies
SN74BCT29821DWRG4 Applications
There are a lot of Texas Instruments SN74BCT29821DWRG4 Flip Flops applications.
- Computers
- Digital electronics systems
- Automotive
- QML qualified product
- Single Up Count-Control Line
- Patented noise
- Buffer registers
- Functionally equivalent to the MC10/100EL29
- Matched Rise and Fall
- Reduced system switching noise
